blownhorse
11/8/2006 10:29:00 PM
I'm building an 800hp blower motor for my 73' Grande. I'm using a Dart Iron Eagle SBF with 9.2 deck, 4.125 bore, 351C mains, a forged 3.75 crank, 6.00 forged rods, and forged Ross pistons, to produce a 402ci Clevor. Using Air Flow Dynamic aluminum 4V heads with a large bore BDS 671 blower. I am looking for anyone who might have dealt with Ford Performance Solutions in Anaheim, CA (as an engine builder) and anyone with knowledge of AFD (Australia) aluminum 4v heads. Also any advice on this combination. Thanks.
mustanglover66
11/9/2006 10:19:10 PM
I work for an engine builder but I'm not the one to answer your questions but if you want to give us a call tomorrow ask for doug he is the dyno guy and loves talking about blowers and has delt with some of the tech lines. Our number is 704 888 8111.
blownhorse
11/9/2006 11:29:10 PM
Thanks, I will call tomorrow.
