[ View Full Version Of This Page ]

Cutting out Problem 5.4

All Forums » Ford F-150 » Cutting out Problem 5.4

dshaw11
12/20/2006 9:42:59 PM
I have an 01 5.4 with 98000 miles.  I was on my home from work when going up a hill i got on the gas and when i did it started to run rough.  I got home then drove fine for about 2 miles then started again.  the check engine light is not on.  Please let me know what you may think is wrong.
Capt.Moe
12/20/2006 10:07:12 PM
What do you mean by running rough? What are the conditions you  are in, under acceleration? Deceleration? Towing a load? Need some more info.
dshaw11
12/20/2006 10:31:41 PM
just sittin in park it acts normal, but as soon as i put it in drive it starts to vibrate.  this just started today.  Also i around 40 i switched off overdrive and the vibration became less but was there.  when i let off the gas the vibration stops but as soon as i get on it, its runs rough
 
Malibu Barbie
12/20/2006 11:49:23 PM
It sounds like you might have a vacuum leak.  The first thing I'd do is run the diagnostics.  AutoZone will run the codes for free.  Please let us know what errors it displays, if any.
Bullitt94
12/21/2006 9:14:31 AM
Check plugs and coils.
Try running fuel injector cleaner in the gas.
dshaw11
12/21/2006 10:55:09 AM
readout came to a #7 misfire and the code 1405
Bullitt94
12/21/2006 12:08:40 PM
Sounds like a coil or plug.
Related Threads

[ View Full Version Of This Page ]

Return to the Ford Forum home page - Archive Home