Power door lock actuator

i Have a 2000 explorer does any one know how to disconnect the front drivers door actuator the rivit is out is there a procedure to disconect the linkage in there cant see in there very well

Removal

1. Remove the front door trim panel   
   
2. Remove the watershield.

   To remove the power door lock actuator.       
 
Disconnect the electrical connector.
Drill out the rivet.
Disconnect the actuator rod.
Remove the actuator

Installation

1. To install, reverse the removal procedure.
   
2. Use Heavy-Duty Riveter to install the actuator rivet.
   

Thumbnail Image

Thanks hayapower took care of it works perfect now