RE: 2003 expo vibrations when turning from take off
Login | |
|
RE: 2003 expo vibrations when turning from take off - 10/16/2007 9:03:43 AM
|
|
|
O2THPIC
Posts: 11
Score: 0 Joined: 4/11/2007 Status: offline
|
i'm back and i've still not replaced the cluch pack. has antone out here ever replaced the cluch pack at the house?
_____________________________
No officer, I didn't know i was going that fast. (yea right, 130 in a 65)
|
|
|
|
|
|
RE: 2003 expo vibrations when turning from take off - 10/20/2007 3:26:14 PM
|
|
|
02greenF150
Posts: 60
Score: 0 Joined: 8/11/2007 Status: offline
|
I have never attempted it at home although i have done them in a shop. You need a special tool to remove the axle gear due to the spring that holds pressure against the spider gear set. Ford does not sell the tool although i use all thread and nuts and washers to spread the gears then i use my air hammer to spin the axel gear and then i replace the clutches and the reverse the preocess. I would suggest having ford do this if you have never rebuilt a rear diff. you also need to soak the clutched in xl-3 and gear oil for at least 1/2 hour before installing. If you have any other rear end noise this is the time to fix it. Do you have any whyne front 50-60mph?
|
|
|
|
Contact Us |
Link To Us |
Advertising |
Automotive Directory |
Archive |
Ford Links |
Legal |
Privacy Policy |
© Ford Forum
Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.
|