Ford Forum  
Ford Forum   Ford Classifieds   Photo Gallery   Member List   Search   Ford Recalls   Contact FF   Sponsors
  Ford News   Ford Lineup   Forum FAQ   Calendars   Ford TSB's   Register   Login  

backfire through carby

  Printable Version
Ford Forums >> General Ford Forums >> General Tech >> backfire through carby Page: [1]
Login
Message << Older Topic   Newer Topic >>
backfire through carby - 2/15/2005 5:40:30 AM   
xy351windsor

 

Posts: 1
Score: 0
Joined: 2/15/2005
Status: offline
hi i am in australia i have a 351 windsor i changed my sump gasket and pulled oil pump drive out , since putting all back together i have a misfire , the car is backfiring through the carby under load , the timing is set about 10 bftdc as it was before , but i just cant get rid of this misfire , the car still pulls ok but just slight popping through carby , i know i may have put the dizzy in a tooth out but have checked and reset timing with no1 at tdc any suggestions


Thumbnail Image


Attachment (1)
Post #: 1
RE: backfire through carby - 2/16/2005 8:58:30 PM   
cctxfish

 

Posts: 735
Score: 0
Joined: 1/12/2005
Status: offline
Double check the firing order.
Maybe you have a bad intake valve?

(in reply to xy351windsor)
Post #: 2
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Ford Forums >> General Ford Forums >> General Tech
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
hayapower2105
goinstrong945
techmanbd877
94 4x4 range834
cctxfish735
ramrod48608
use common s542
bullitt94488
wheelsup68431
mulletman343

New Vendors
AMSOIL - Performance Oil Technology

Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.