95 escort timing belt and cooling fan problem
Login | |
|
95 escort timing belt and cooling fan problem - 8/18/2006 8:28:15 AM
|
|
|
bernieb
Posts: 6
Score: 0 Joined: 8/17/2006 Status: offline
|
Have put in a new waterpump and in the process got the crank and cam out of line. I followed the hanes manual putting number one piston up and that put the vr sensor on top of ninth tooth on crank pully from the missing tooth on pully. The cam pully pointer was straight up ,new belt on , first turn of key got a cough but nothing afterwards. Went through this sequence many times and several of the times with the cam pointer off 90 degress engine started rpm was up but quit on its own and refused to start again,but started with a different cam setting but was not right. Can the computer have anything to do with my problem? My fan cooling problem can wait,but is the same as the nearby poster and will cover later. bernie
|
|
|
|
|
|
RE: 95 escort timing belt and cooling fan problem - 8/18/2006 3:44:47 PM
|
|
|
bernieb
Posts: 6
Score: 0 Joined: 8/17/2006 Status: offline
|
Well I found out why my timing was never the same after lining up crank and cam. I had too much tension on the belt with the spring loaded tensioner,and it was jumping teeth. I put a little slop in the belt and bingo it works perfect. I'm now on the no cooling fan problem,will report back.
|
|
|
|
RE: 95 escort timing belt and cooling fan problem - 8/18/2006 4:08:46 PM
|
|
|
94 4x4 ranger
Posts: 834
Score: 0 Joined: 7/7/2006 Status: offline
|
No fan poewr at all? Check the fan relay?
_____________________________
94 4x4 ranger
|
|
|
|
RE: 95 escort timing belt and cooling fan problem - 8/19/2006 6:25:28 PM
|
|
|
bernieb
Posts: 6
Score: 0 Joined: 8/17/2006 Status: offline
|
No fan at any temperture and i'm finding out the computer is involved .Iv'e checked the relay in the fuse box in front of the battery by taking the cover off and putting 12v to the termanels marked coil and it pulled in the other two . The other two below the air filter checked okay also. I tried reading the codes but got no response so tomorrow i'm checking the eec relay in front of the floor shifter inside,as i believe its power for the computer.
|
|
|
|
Contact Us |
Link To Us |
Advertising |
Automotive Directory |
Archive |
Ford Links |
Legal |
Privacy Policy |
© Ford Forum
Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.
|