Transmission Linkage Problem for 1997 E-350 Econo Club Wagon
Login  | |
|
Transmission Linkage Problem for 1997 E-350 Econo Club ... - 9/20/2006 7:45:14 PM
|
|
|
BobD
Posts: 2
Score: 0
Joined: 9/20/2006
Status: offline
|
When I put the shift handle into reverse position, it's actually in neutral. I can get under the truck and manually shift the lever on the transmission into reverse and it will work. The cable seems to be stretched. When I put the shift handle into neutral, it actually goes into Drive. The transmission doesn't correspond to what the shift handle is indicating. As far as I can see, this is not a transmission problem, but a linkage problem of some sort. When the transmission is actually in the gear it's supposed to be in, it works perfectly fine, so I don't think anything is wrong internally with it. Can anyone give me advice as to what the problem is and how it can be rectified. Are there any adjustments that I can make to shorten or adjust the linkage to get it back to working for the correct gear again? I appreciate any information received on this matter. Thanks.
|
|
|
|
|
|
|
Printable Version
I would check to bushing's on the shift linkage for wear also check the shift indacator to make shure it is not hanging up.
