Engine swap Bronco (Full Version)

Ford >> Past Ford Models >> Ford Bronco

Engine swap Bronco

  

Adkrpd -> Engine swap Bronco (10/12/2006 8:41:23 AM)

Hello, I need some advice / instruction on changing a 5.0 engine from a 1989 Bronco to a 1995 Bronco. They both have the same size engine, but I was wondering what kind of problems I would run into.( such as electrical connectors ). I appreciate any help, Thanks Rick D.

  
94 4x4 ranger -> RE: Engine swap Bronco (10/12/2006 9:13:00 AM)

[sm=welcomesign.gif]
As far as the electrical connectors you should reuse the old intake manifold this way all your connectors will be the same.
For the engine removal.
You will have to remove the bell housing bolts,motor mount bolt's,tourqe converter bolts to flywheel,disconnect all wire's and hose's to engine,remove radiator,disconnect exaust,and the a/c if you have it.Every thing must be disconnected from the engine in case i missed somthing. and get a engine hoist and remove the engine.
To install do the above in reverse.

Adkrpd -> RE: Engine swap Bronco (10/12/2006 9:16:45 AM)

94 4x4 ranger, Thank you, That's the exact info. I was looking for !! Take Care

94 4x4 ranger -> RE: Engine swap Bronco (10/12/2006 9:28:56 AM)

No problem,You may want to buy the book for your truck for more detailed info.And the intake must be tourqed in a special way with a tourqe wrench.

  

Page: [1]

Return to Ford Forum home page or view the Full Version of this page.