Engine swap Bronco

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

Engine swap Bronco

Printable Version

Ford Forum >> Past Ford Models >> Ford Bronco >> Engine swap Bronco

Page: [1]

Message

<< Older Topic Newer Topic >>

Engine swap Bronco - 10/12/2006 8:41:23 AM

Adkrpd

Posts: 4
Score: 0
Joined: 10/12/2006
Status: offline

Hello, I need some advice / instruction on changing a 5.0 engine from a 1989 Bronco to a 1995 Bronco. They both have the same size engine, but I was wondering what kind of problems I would run into.( such as electrical connectors ). I appreciate any help, Thanks Rick D.

Post #: 1

RE: Engine swap Bronco - 10/12/2006 9:13:00 AM

94 4x4 ranger

Posts: 834
Score: 0
Joined: 7/7/2006
Status: offline

As far as the electrical connectors you should reuse the old intake manifold this way all your connectors will be the same.

For the engine removal.

You will have to remove the bell housing bolts,motor mount bolt's,tourqe converter bolts to flywheel,disconnect all wire's and hose's to engine,remove radiator,disconnect exaust,and the a/c if you have it.Every thing must be disconnected from the engine in case i missed somthing. and get a engine hoist and remove the engine.

To install do the above in reverse.

_____________________________

94 4x4 ranger

(in reply to Adkrpd)

Post #: 2

RE: Engine swap Bronco - 10/12/2006 9:16:45 AM

Adkrpd

Posts: 4
Score: 0
Joined: 10/12/2006
Status: offline

94 4x4 ranger, Thank you, That's the exact info. I was looking for !! Take Care

(in reply to 94 4x4 ranger)

Post #: 3

RE: Engine swap Bronco - 10/12/2006 9:28:56 AM

94 4x4 ranger

Posts: 834
Score: 0
Joined: 7/7/2006
Status: offline

No problem,You may want to buy the book for your truck for more detailed info.And the intake must be tourqed in a special way with a tourqe wrench.

_____________________________

94 4x4 ranger

(in reply to Adkrpd)

Post #: 4