402 Dart/Cleveland

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

402 Dart/Cleveland

Printable Version

Ford >> Brand Review >> Engine & Internal Lounge >> 402 Dart/Cleveland

Page: [1]

Message

<< Older Topic Newer Topic >>

402 Dart/Cleveland - 11/8/2006 10:29:00 PM

blownhorse

Posts: 3
Score: 0
Joined: 11/8/2006
Status: offline

I'm building an 800hp blower motor for my 73' Grande. I'm using a Dart Iron Eagle SBF with 9.2 deck, 4.125 bore, 351C mains, a forged 3.75 crank, 6.00 forged rods, and forged Ross pistons, to produce a 402ci Clevor. Using Air Flow Dynamic aluminum 4V heads with a large bore BDS 671 blower. I am looking for anyone who might have dealt with Ford Performance Solutions in Anaheim, CA (as an engine builder) and anyone with knowledge of AFD (Australia) aluminum 4v heads. Also any advice on this combination. Thanks.

_____________________________

Blownhorse

Post #: 1

RE: 402 Dart/Cleveland - 11/9/2006 10:19:10 PM

mustanglover66

Posts: 3
Score: 0
Joined: 11/9/2006
Status: offline

I work for an engine builder but I'm not the one to answer your questions but if you want to give us a call tomorrow ask for doug he is the dyno guy and loves talking about blowers and has delt with some of the tech lines. Our number is 704 888 8111.

(in reply to blownhorse)

Post #: 2

RE: 402 Dart/Cleveland - 11/9/2006 11:29:10 PM

blownhorse

Posts: 3
Score: 0
Joined: 11/8/2006
Status: offline

Thanks, I will call tomorrow.

_____________________________

Blownhorse

(in reply to mustanglover66)

Post #: 3