89 Ranger: Hazards work, but no turn signals and fuse panael ? . (Full Version)

Ford Forum >> General Ford Forums >> General Tech

89 Ranger: Hazards work, but no turn signals and fuse panael ? .


  

Luke 22 -> 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/14/2006 8:22:29 PM)

New to me 89 Ranger: Hazards work, but no turn signals.
I did replace the flasher relay in the fuse panel All other lights are working. There is no relay clicking with the turn signals.

I don’t have an owners manual. What goes in the empty slots in the fuse panel?
drawing of my fuse panel http://www.geocities.com/bible101a/rangerfuses.jpg


  

wheelsup68 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/14/2006 8:27:24 PM)

The turn signal flasher is separate from fuse block if I remember right. In my 88 ranger it was uderneath knee bolster under steering column. Pull the flasher out you just replaced and see if you no longer have hazard flasher?


Luke 22 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/14/2006 9:55:19 PM)

With the flasher relay removed on the fuse panel the hazards still flash.


wheelsup68 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/14/2006 10:06:29 PM)

sorry bout misadvice, I just though I remembered. could be turn signal switch have u tried wiggle test.


Luke 22 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/14/2006 10:22:41 PM)

Not misadvised I tried it and did not have time to edit post with information.

What is "have u tried wiggle test. "


wheelsup68 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/14/2006 11:38:13 PM)

Just try to wiggle turn signal switch a little bit while trying to operate. jab lever a little to se if it has dirty contacts or something like that?


Luke 22 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/15/2006 12:57:16 AM)

I tried that it did not work.


chevybb36 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/27/2006 12:43:59 PM)

are you sure you have the correct flasher? There are many flashers and some look the same but are different and wont work, if in doubt call dealer or a good part store.


Luke 22 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/28/2006 12:12:57 AM)

On my 89 I am thinking I have an intermittent electrical problem. Thanksgiving morning it would not start to come home from the grocery store. It was getting spark but fuel was not pumping in the line. While the fuel filter was off I was going to replace it on Friday in the parking lot. Friday before replacing the filter the line started pumping fuel. It could be related to my turn indicator lights they are intermittent now they work when they feel like it.


wheelsup68 -> RE: 89 Ranger: Hazards work, but no turn signals and fuse panael ? . (11/28/2006 10:28:51 PM)

You got yourself a nasty gremlin there. Mabey a bad chassis ground somewhere?


  

Page: [1] 2   next >   >>

Return to Ford Forum home page or view the Full Version of this page.