Power steering pump (Full Version)

Ford Forum >> Ford Cars >> Ford Focus

Power steering pump

  

blksabbath -> Power steering pump (12/8/2006 1:49:41 PM)

I'm going to replace the leaky power steering pump in my fiance's 2000 SE Zetec dohc this weekend. It looks pretty straight forward in the Haynes manual, although it mentions using a special tool to remove one of the hose connections. I haven't had the car up yet to take a look, but is this a tool that I'll need to rent? Or can I get by with common tools? Any other advice would be greatly apprectiatied.

Thanks!

  
Hayapower -> RE: Power steering pump (12/8/2006 3:10:22 PM)

The hose release tool is for the 2.0 SPI fluid cooler line ( I believe).. But you will need the pulley removal/install tool..

Here's a pic of the SPI release tool, the hose released, and then a pick of the Zetec pump showing a standard connection.. Also the pulley/hub tool needed.. And the teflon ring/seal needs to be replaced when ever the hoses is disconnected....

[image]local://upfiles/6756/EF3B9863DE7D4A188E59705E03971709.jpg[/image]

[image]local://upfiles/6756/AF31381D03D24B17AF31B36BE646C345.jpg[/image]

[image]local://upfiles/6756/86B5C110B078483DABE77EEE01755549.jpg[/image]

[image]local://upfiles/6756/063141086B2D4C3AA6CC27435CFC9455.jpg[/image]

  

Page: [1]

Return to Ford Forum home page or view the Full Version of this page.