RE: Need HELP ASAP with starter cylinder for Ranger

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

RE: Need HELP ASAP with starter cylinder for Ranger

Printable Version

Ford Forums >> General Ford Forums >> General Tech >> RE: Need HELP ASAP with starter cylinder for Ranger

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: Need HELP ASAP with starter cylinder for Ranger - 12/19/2006 7:33:24 PM

Silverrr

Posts: 6
Score: 0
Joined: 11/13/2006
Status: offline

Thank you for all the info , just pick up the part and this is what they sold me ...a igniton cilinder with a set of keys ...so it will be a direct swap from the OEM cilinder ...only problem my OEM key comes with a chip in it ..will the truck start if I swap the cilinders ??? Im starting to think that it won't ....if this is the case I will need a rebuild set from Ford so it can work with my OEM key and chip

(in reply to Hayapower)

Post #: 11

RE: Need HELP ASAP with starter cylinder for Ranger - 12/19/2006 8:29:15 PM

Silverrr

Posts: 6
Score: 0
Joined: 11/13/2006
Status: offline

I got the old cilinder out

...the piece that broke is the tip of the cilinder it self ...the part that Autozone sold me is close but not the same ,tomorrow I will go to the Ford dealer and see if they have that tip or I guess I will have to buy the rebuild kit , I will like to just replace the tip only on the old cilinder so I don't have to mess with re setting the chip in the key (transponder key is the name I found out) ....one more thing... is it possible to disassemble the original cilinder ???? I didn't see a way to do it ...Thankss!!