Reverse Problem (Full Version)

Ford Forum >> Brand Review >> Transmission

Reverse Problem

  

transcare -> Reverse Problem (2/7/2007 2:20:35 PM)

hello my 96 ranger will not go into revese what could be the possible cause.

  
Toucan -> RE: Reverse Problem (2/15/2007 7:57:54 PM)

If auto transmission it could be that you need to replace some seals or plates.  Meaning a repair kit.

darnizzle8805 -> RE: Reverse Problem (3/10/2007 4:29:11 PM)

my 2000 zx2 is having the same problem with reverse. its an auto. could it use the same treatment??

goinstrong -> RE: Reverse Problem (8/10/2007 10:04:20 PM)

The easiest way to start with any transmission problem is to see if a fluid and filter change helps first. A dirty filter will cut fluid pressure and things will cease to work little by little. If filter and fluid level are there - then comes time for the hassle of tearing it apart for seals and plates - but at that point it may as well be remanufactured (have new bushings, gears, etc. put in too) so you don't end up going over it again any time soon unless it was a new transmission or had low miles on.

goinstrong -> RE: Reverse Problem (8/10/2007 10:07:28 PM)

And don't forget to start by checking for fluid loss (proper level). A cracked transmission line don't warrant taking apart the whole unit. I've made a mountain out of a molehill enough times to keep the simple stuff in mind first.

  

Page: [1]

Return to Ford Forum home page or view the Full Version of this page.