engine swap

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

engine swap

Printable Version

Ford Forums >> Ford Trucks, Ford Vans & Ford SUV's >> Ford F-150 >> engine swap

Page: [1]

Message

<< Older Topic Newer Topic >>

engine swap - 4/24/2005 10:02:42 PM

fordmann67

Posts: 9
Score: 0
Joined: 4/24/2005
Status: offline

I currently have a 1994 F-150 4x4, auto, 5.0 fuel injected............wondering if a 1986 Bronco 5.0 fuel injected would fit in the truck? The truck has a serpentine belt set-up and the Bronco has a regular V-belt. Will accessories...A/C pump, alternator and power steering pump bolt on to the Bronco engine? Any help would be great, have the oppurtunity to get a heck of a deal on a rebuilt engine with really low miles and don't want to pass up a good deal!!!!!!

Post #: 1

RE: engine swap - 4/25/2005 1:50:54 PM

skip

Posts: 30
Score: 0
Joined: 3/6/2005
Status: offline

Yes a 302 is a 302. A few differences that you might find are:
1. Some of the older 302's required long reach plug because the cooling ports in the heads are larger (autolight 25-45 instead of the 45)
2. The top bolt of your 94 accessory assembly will be smaller than the hole in the block (just get a hixa coil)
3. The cam is probably slightly different but your 94 computer should adjust for the difference.

(in reply to fordmann67)

Post #: 2

RE: engine swap - 5/8/2005 7:22:46 PM

Hawn

Posts: 1
Score: 0
Joined: 5/8/2005
Status: offline

I have a '66 Bronco with a 289. Edelbrock (weber) Carb. Performer intake manifold. Anyway, I try to start it and it backfire through the carb. Any suggestions would be helpful.

The Hawaiian

(in reply to fordmann67)

Post #: 3