2003 6.0 PSD Gauge cluster dead...

Printable Version

Ford Forums >> Ford Trucks, Ford Vans & Ford SUV's >> Ford F-250 & Ford F-350 >> 2003 6.0 PSD Gauge cluster dead...

Page: [1]

Login Message << Older Topic   Newer Topic >>

2003 6.0 PSD Gauge cluster dead... - 6/11/2007 8:57:41 PM    MightyYT   Posts: 4 Score: 0 Joined: 6/11/2007 Status: offline It all quit short of the turn signals and high beam, Fuses good, gauge is plugged in, Help I dont want to go to the dealer Post #: 1

RE: 2003 6.0 PSD Gauge cluster dead... - 6/11/2007 9:32:29 PM    Hayapower Posts: 2082 Score: 0 Joined: 7/22/2006 Status: offline Key Off... Push and 'hold' the trip meter button in,, then cycle the key to the ON position (not start) and hold the button in until 'test' reads on the display.. Release... The gauge cluster should go into self test mode.. Once int test mode, 'each' push of the trip button will cycle to the next test step/function and DTC's for the cluster .. Does it go into test? _____________________________ 05 F250 C/C FX4 6.0 1969 Firebird Trans Am 2003 Hayabusa GSXR1300 (in reply to MightyYT) Post #: 2

RE: 2003 6.0 PSD Gauge cluster dead... - 6/11/2007 9:39:01 PM    MightyYT   Posts: 4 Score: 0 Joined: 6/11/2007 Status: offline It was fuse 45....run start feed, nothing even remotely related to what you would think it would be from looking at the fuse listing (in reply to MightyYT) Post #: 3

RE: 2003 6.0 PSD Gauge cluster dead... - 6/11/2007 9:40:10 PM    MightyYT   Posts: 4 Score: 0 Joined: 6/11/2007 Status: offline Thanks HAYA! (in reply to Hayapower) Post #: 4

RE: 2003 6.0 PSD Gauge cluster dead... - 6/11/2007 9:50:40 PM    Hayapower Posts: 2082 Score: 0 Joined: 7/22/2006 Status: offline #35/10amp, #33/15amp, #45/10amp.. You can run the truck in test mode if you start it after it enters test.. You can bring up digital tach, digital speed/mph, temps ect... Glad it was a simple fix... _____________________________ 05 F250 C/C FX4 6.0 1969 Firebird Trans Am 2003 Hayabusa GSXR1300 (in reply to MightyYT) Post #: 5

RE: 2003 6.0 PSD Gauge cluster dead... - 6/12/2007 5:18:34 PM    MightyYT   Posts: 4 Score: 0 Joined: 6/11/2007 Status: offline HAYA!  Help....ran fine all day several hundred miles. When I went out a little bit ago it was hard to start, took three tries the I noticed no gauges again....same fuse blown # 45 (in reply to MightyYT) Post #: 6

RE: 2003 6.0 PSD Gauge cluster dead... - 6/12/2007 8:51:18 PM    Hayapower Posts: 2082 Score: 0 Joined: 7/22/2006 Status: offline Did it smoke both on start up? or did the other pop on the road ect... _____________________________ 05 F250 C/C FX4 6.0 1969 Firebird Trans Am 2003 Hayabusa GSXR1300 (in reply to MightyYT) Post #: 7

RE: 2003 6.0 PSD Gauge cluster dead... - 6/15/2007 2:44:02 AM    Beater   Posts: 23 Score: 0 Joined: 11/3/2006 Status: offline They have a recall or TSB on the cluster. Had one put in mine already. Same year truck. (in reply to Hayapower) Post #: 8

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Ford History
Mustang

Ford Prices

Ford Trucks & SUVs
F-150 Expedition
Ranger Explorer
Freestar F-Series
Explorer Sport Trac
Excursion Escape

Ford Cars
Five Hundred GT
Freestyle Mustang
Taurus Fusion
Thunderbird Focus

Top 10 Posters
hayapower 2082 goinstrong 943 techmanbd 877 94 4x4 range 834 cctxfish 735 ramrod48 608 use common s 540 bullitt94 475 wheelsup68 431 mulletman 343

New Vendors
AMSOIL - Performance Oil Technology