Freestar analog dash clock

Printable Version

Ford >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Freestar >> Freestar analog dash clock

Page: [1]

Login Message << Older Topic   Newer Topic >>

Freestar analog dash clock - 6/20/2007 10:03:18 AM    Jakers   Posts: 40 Score: 0 Joined: 6/20/2007 Status: offline Just bought a 2004 Freestar Sport and love it but like to install the analog clock in the center of the dash. Bought the clock and the center vent assymbly but wander if anybody did the same and would like to know if the wiring for this clock is in the wiring bundle behind the dash. Can anybody shed some light on this? TIA Jake Post #: 1

RE: Freestar analog dash clock - 6/22/2007 1:43:05 PM    Jakers   Posts: 40 Score: 0 Joined: 6/20/2007 Status: offline This is more or less a reply to my own enquiry as I since found out I also need the wiring for this clock and have ordered it from Ford. (in reply to Jakers) Post #: 2

RE: Freestar analog dash clock - 6/29/2007 11:54:15 AM    Jakers   Posts: 40 Score: 0 Joined: 6/20/2007 Status: offline Got the clock and wiring installed and IMHO adds a bit of pizazz to the interior. Too bad I did get no help from this forum. (in reply to Jakers) Post #: 3

RE: Freestar analog dash clock - 6/29/2007 1:46:30 PM    Hayapower Posts: 1889 Score: 0 Joined: 7/22/2006 Status: offline Thanks for the update.. Post a pic if you can.... _____________________________ 05 F250 C/C FX4 6.0 1969 Firebird Trans Am 2003 Hayabusa GSXR1300 (in reply to Jakers) Post #: 4

RE: Freestar analog dash clock - 7/2/2007 7:35:02 AM    Jakers   Posts: 40 Score: 0 Joined: 6/20/2007 Status: offline Here a picture of the finished installation. Thumbnail Image Attachment (1) (in reply to Hayapower) Post #: 5

RE: Freestar analog dash clock - 7/15/2008 12:12:33 PM    jcasaccio Posts: 23 Score: 0 Joined: 2/7/2006 Status: offline The bulb on my clock has just burned out.   To get the clock out of the dash, does it just slide out from the plastic (the whole chrome bezel and clock) or is it hard to remove the clock? (in reply to Jakers) Post #: 6

RE: Freestar analog dash clock - 9/4/2008 6:59:44 PM    jcasaccio Posts: 23 Score: 0 Joined: 2/7/2006 Status: offline Ok Jakers.  First let me say thanks for replying to my question I sent you a short time ago.  I am trying to replace the clock light bulb.  My problem (still) is that I can''t get the darn vent panel off, without thinking I''ll break it.  I tried screwdrivers to pry off and try to lift past the plastic tabs holding it in.  I have not been successful.  I do all the maintenance on my cars and this one has me miffed/scared of breaking it.   What tools did you use to get that thing off?  I also tried a 2" putty knife, but still no go.   Any other advice is appreciated.   I am not trying to be annoying, but the burnt bulb is so annoying..... Regards, Jack (in reply to jcasaccio) Post #: 7

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Ford History
Mustang

Ford Prices

Ford Trucks & SUVs
F-150 Expedition
Ranger Explorer
Freestar F-Series
Explorer Sport Trac
Excursion Escape

Ford Cars
Five Hundred GT
Freestyle Mustang
Taurus Fusion
Thunderbird Focus

Top 10 Posters
hayapower 1889 goinstrong 914 techmanbd 866 94 4x4 range 834 cctxfish 735 ramrod48 608 use common s 472 wheelsup68 431 bullitt94 430 mulletman 343

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.