Ford Forum  
Ford Forum   Ford Classifieds   Photo Gallery   Member List   Search   Ford Recalls   Contact FF   Sponsors
  Ford News   Ford Lineup   Forum FAQ   Calendars   Ford TSB's   Register   Login  

1968 Fairlane - Power Brakes - HELP!

  Printable Version
Ford Forum >> Past Ford Models >> Fairlane/Falcon/Galaxie/Gran Torino >> 1968 Fairlane - Power Brakes - HELP! Page: [1]
Login
Message << Older Topic   Newer Topic >>
1968 Fairlane - Power Brakes - HELP! - 6/29/2007 3:26:23 PM   
skuntz01

 

Posts: 7
Score: 0
Joined: 1/26/2007
Status: offline
Can anyone help me change from manual to power assist? I purchased a power booster and master cylinder, but it seems to long to fit.
Post #: 1
RE: 1968 Fairlane - Power Brakes - HELP! - 6/29/2007 8:53:41 PM   
n3vyk

 

Posts: 12
Score: 0
Joined: 6/16/2007
Status: offline
My 68 Fairlane SW has power brakes. The booster & mastercylinder are pretty long. They are right next to the shock tower. One of the lines comes off of the bottom of the master cylinder. Does your M/C have one port on the bottom?

_____________________________

Andy McElhaney
73 Ranchero
61 Ranchero
68 Fairlane Station wagon
71 Norton Commando
99 Triumph Trophy
68 BSA 441 Shooting Star

(in reply to skuntz01)
Post #: 2
RE: 1968 Fairlane - Power Brakes - HELP! - 6/30/2007 1:21:51 PM   
skuntz01

 

Posts: 7
Score: 0
Joined: 1/26/2007
Status: offline
Yes. Mine has a port on the bottom, out at the end of the unit.
Also, I am wondering if you could do me a big favor?
Can you measure the length of the master/power booster unit?
Can you tell me if there a plate/adapter between the unit and the firewall which causes the unit to adjust so it ends up just inside the shock tower?
Thats my hunch right now. I'll have to find a plate/adapter if you see one in there.
Thanks much.
Sam

(in reply to n3vyk)
Post #: 3
RE: 1968 Fairlane - Power Brakes - HELP! - 7/1/2007 12:07:21 PM   
n3vyk

 

Posts: 12
Score: 0
Joined: 6/16/2007
Status: offline
Sam,
    My unit is 18" from the firewall to the end of the mastercylinder. It has a bracket at the firewall end that spaces it up and out from the firewall. The bracket also has a bellcrank setup to match the amount that the assembly is raised from the hole in the firewall. It lines the rod on the pedal to the pushrod going into the booster.
                                                               Andy

_____________________________

Andy McElhaney
73 Ranchero
61 Ranchero
68 Fairlane Station wagon
71 Norton Commando
99 Triumph Trophy
68 BSA 441 Shooting Star

(in reply to skuntz01)
Post #: 4
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Ford >> Past Ford Models >> Fairlane/Falcon/Galaxie/Gran Torino
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
hayapower1962
goinstrong928
techmanbd866
94 4x4 range834
cctxfish735
ramrod48608
use common s498
bullitt94445
wheelsup68431
mulletman343

New Vendors
AMSOIL - Performance Oil Technology

Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.