1998 Contour fan in-op? (Full Version)

Ford Forum >> Past Ford Models >> Ford Contour

1998 Contour fan in-op?

  

Fredo -> 1998 Contour fan in-op? (7/10/2007 1:02:10 PM)

Just bought a 1998 Contour Gl 2.0L. The heater/A/C fan is in-op. I was going to check the fuse.
but I do not have an owners manual. Can anyone help?

  
Hayapower -> RE: 1998 Contour fan in-op? (7/20/2007 9:10:32 PM)

You can download an owners manual here.. https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Also check the blower relay, the heater/fan blower resistor...

[image]local://upfiles/6756/141554277B1B437CBAEE03A7D6A86BD9.gif[/image]

Fredo -> RE: 1998 Contour fan in-op? (7/21/2007 6:17:55 AM)

I checked the fuse and the relay, both  are good. Anything else I can check?

Fredo -> RE: 1998 Contour fan in-op? (7/22/2007 9:00:04 AM)

I checked the power to the heater fan motor itself and I am getting power to it. I assume the motor is bad. Does anyone know how to remove it? I do not see any screws on the motor to remove it?

Hayapower -> RE: 1998 Contour fan in-op? (7/22/2007 9:36:31 AM)

Blower Motor

Removal

1. Remove the pushpins for the upper footwell trim panel on the passenger side and remove it.
[image]local://upfiles/6756/4402B8F5BDEE4093800488C77CED33A6.jpg[/image]

2.Remove the blower motor.
Disconnect the electrical connector.
Lift the securing tab slightly.
Turn the blower motor approx. 30° counterclockwise and remove it.
[image]local://upfiles/6756/34119D9712C04B679AAD82B6051FD3D6.jpg[/image]

Installation
1.      NOTE: Engage the securing tab for the blower motor.
To install, reverse the removal procedure.
[image]local://upfiles/6756/96A044B9CBF24C33ACA17865D224679B.jpg[/image]

Hayapower -> RE: 1998 Contour fan in-op? (7/22/2007 9:44:58 AM)

Check for 12v and an applied ground for blower function/operation before replacement

Fredo -> RE: 1998 Contour fan in-op? (8/5/2007 9:35:31 AM)

Thanks, it was a bad fan motor.

Hayapower -> RE: 1998 Contour fan in-op? (8/5/2007 11:08:42 AM)

Thanks for the update....

  

Page: [1]

Return to Ford Forum home page or view the Full Version of this page.