Ford Forum  
Ford Forum   Ford Classifieds   Photo Gallery   Member List   Search   Ford Recalls   Contact FF   Sponsors
  Ford News   Ford Lineup   Forum FAQ   Calendars   Ford TSB's   Register   Login  

V8 Swaps for OBDII Rangers (2000 and newer)??

  Printable Version
Ford Forum >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Ranger >> V8 Swaps for OBDII Rangers (2000 and newer)?? Page: [1]
Login
Message << Older Topic   Newer Topic >>
V8 Swaps for OBDII Rangers (2000 and newer)?? - 7/26/2007 11:50:49 AM   
tomb1269

 

Posts: 204
Score: 0
Joined: 11/21/2006
Status: offline
I have been hunting down do-able V8 swaps for a 2003 Ranger, particularly a 2wd EDGE. I know that I can not go backwards in years, IE using the 5.0 option due to emissions. The MOD motors (4.6 & 5.4) are at best a real squeeze play, as well as weight could pose a real problum with the torson bar suspension. I did see one gent dropped a 4.6 from a Mark V in, but it was a pre-2000 Ranger. I have ran across the fact that the Lincoln LS has a 3.9l V8 pushing 282hp and 250foot with a selectable 5 speed auto (ManumaticI believe). Has anyone heard of an LS 3.9l V8 being swapped in to a Ranger? If anyone as an LS with the 3.9l V8, could you please take some measurements and post them?
Width (valve cover to valve cover)
Height (lowest point on pan to top of valve cover)
Depth (water pump to tranny bell or back of block)
Distance from front of engine/oil pan to motor mounts, and to drop in pan.

Thanks

_____________________________

Tom
2006 Freestar SEL 4.2L F/Ld
2002 Ranger Edge 3.0L extd
2005 Jayco 806 P/U trailer - eaten by mice winter 2008
Post #: 1
RE: V8 Swaps for OBDII Rangers (2000 and newer)?? - 9/13/2007 11:29:15 AM   
brantm21

 

Posts: 3
Score: 0
Joined: 12/16/2006
Status: offline
I bought my 94 Ranger V8 SWAP from <a href="www.fordcobraengines.com">Ford Cobra Engines.com</a> So check it out....If yo have any questions you can email or call them and they will be more than happy to help you....they have excellent experts

(in reply to tomb1269)
Post #: 2
RE: V8 Swaps for OBDII Rangers (2000 and newer)?? - 9/13/2007 11:29:54 AM   
brantm21

 

Posts: 3
Score: 0
Joined: 12/16/2006
Status: offline
http://www.fordcobraengines.com     OK this site.....sorry about that

(in reply to brantm21)
Post #: 3
RE: V8 Swaps for OBDII Rangers (2000 and newer)?? - 9/14/2007 2:07:07 AM   
Use Common Sense

 

Posts: 540
Score: 0
Joined: 1/12/2007
Status: offline
The 3.9L V8 is a Jaguar AJ-V8 engine.  The AJ-V8 is/was used in the Lincoln LS, Thunderbird and also in the Jaguar, Aston Martin and Land Rovers.  The engine comes in a 3.5L, 3.9L, 4.0L, 4.2L and a 4.4L displacement.  There is also a 4.0L supercharged version that put out 400 hp and 408 ft·lbf  of torque (that would be an interesting concept for a Ranger).   So if your looking at a 3.9L, you have many options to chose from.

_____________________________

2004 Freestar Limited 4.2 V6 w/Water Injection & Iridium plugs
2008 Mercury Sable 3.5 V6 w/Opened Air Box

AMSOIL Lubricants and Filters in everything

"Have a good day, and a better one tomorrow"

(in reply to brantm21)
Post #: 4
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Ford >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Ranger
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
hayapower2082
goinstrong943
techmanbd877
94 4x4 range834
cctxfish735
ramrod48608
use common s540
bullitt94475
wheelsup68431
mulletman343

New Vendors
AMSOIL - Performance Oil Technology

Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.