Help with 92 Mercury sable OBD-1

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

Help with 92 Mercury sable OBD-1

Printable Version

Ford Forum >> Past Ford Models >> Other Makes/Models owned by Ford Motor Company >> Help with 92 Mercury sable OBD-1

Page: [1]

Message

<< Older Topic Newer Topic >>

Help with 92 Mercury sable OBD-1 - 9/4/2007 9:10:36 PM

emr454

Posts: 2
Score: 0
Joined: 9/4/2007
Status: offline

Hi all, this is my first post and I hope someone can help me. My sister in law has a 92 Sable with the check engine light on. I was searching around the net tyring to find a way to retreive the trouble codes from the EEC diagnostic connector. I read that you have to ground 2 pins together and hook a test light up and count tha number of flashes on the test light. Is this true? If so, what two pins on the connector have to be grounded? There are 5 on the connector and there is another wire with a small plastic connector in the same wire bundle as the EEC connector. If this isnt the right way, does anyone know how to get the codes out of an OBD-1 system? Any and all help is appreciated. Thank you!

Eric