F250 Diesel Stall

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

F250 Diesel Stall

Printable Version

Ford >> Ford Trucks, Ford Vans & Ford SUV's >> Ford F-250 & Ford F-350 >> F250 Diesel Stall

Page: [1]

Message

<< Older Topic Newer Topic >>

F250 Diesel Stall - 9/20/2007 11:59:02 AM

jajharley

Posts: 1
Score: 0
Status: offline

I have no problems pulling any load or really giving it the gas. My problem starts when I leave a red light or stop sign and around 1500 to 1800 rpms the truck acks like I've cut it off. IT WILL DROP RPMS SO FAST AND COME RIGHT BACK UP. If it does this a couple of times, the engine light will come on. I've already replaced the timing sensor on the front right above the crank pulley. Need some help. John

Post #: 1

RE: F250 Diesel Stall - 9/20/2007 3:26:47 PM

Hayapower

Posts: 2082
Score: 0
Joined: 7/22/2006
Status: offline

It would be a big help to have the DTC read (Autozone ect.) and post the code..

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to jajharley)

Post #: 2

RE: F250 Diesel Stall - 1/18/2008 10:51:06 AM

stroker

Posts: 3
Score: 0
Joined: 12/30/2007
Status: offline

its a cam positioning senser. i had the same problem about a month ago

(in reply to Hayapower)

Post #: 3

RE: F250 Diesel Stall - 1/26/2008 6:25:13 PM

OR97601

Posts: 1
Score: 0
Joined: 1/26/2008
Status: offline

I had that problem about a year ago. for me, it only happened when there was a lot of humidity (heavy fog, rain, etc...)

I think the shop said it was the mass air sensor.

(in reply to stroker)

Post #: 4

RE: F250 Diesel Stall - 2/3/2008 12:09:42 AM

Level2

Posts: 47
Score: 0
Joined: 2/2/2008
Status: offline

quote:

ORIGINAL: stroker

its a cam positioning senser. i had the same problem about a month ago

He already said he replace the CPS. Do you have an aftermarked chip installed? I had problems with corrosion on the pcm terminals when I had a chip installed on my 95 and it would cause stalling and stuttering.

_____________________________

2004 Ranger FX4 Level II
2005 Focus ZX4 ST
2000 F350 CC DRW 4x4 PSD Lariat
1988 Lincoln Town Car Cartier
1985 Mustang GT
1997 F350 4x4 PSD (Sold)
2001 Escort ZX2 (sold)

(in reply to stroker)

Post #: 5

RE: F250 Diesel Stall - 2/14/2008 12:11:24 AM

6Leaker

Posts: 8
Score: 0
Joined: 2/14/2008
Status: offline

If you've got a 7.3L there's a recall on the CMP sensor. F7TZ 12K073 B is the part number.

(in reply to Level2)

Post #: 6

RE: F250 Diesel Stall - 2/18/2008 10:33:17 AM

SUPERDUTYCHIC

Posts: 3
Score: 0
Joined: 2/18/2008
Status: offline

I have had multiple issues with my 6.4 so far Ihad a new thermostste put in , a pse sensor and now she's in the shop again 85 miles later. 6773 miles on my beautiful Big Rig. I also have poor fuel milage 10 mpg.I don't pull much a four wheeler and boat and I sure don't baby her much. see if you can get a diagnostic done P0196 seems to be my trucks favorite so far.I should have went with the V-10 never had a lick of problems with that "99" 180,000 miles and she still ran strong. I guess never isn't always better.

Good luck

_____________________________

SUPERDUTYCHIC

(in reply to jajharley)

Post #: 7

RE: F250 Diesel Stall - 2/23/2008 6:38:04 PM

hobbywelder

Posts: 5
Score: 0
Joined: 2/23/2008
Status: offline

having the troble code would help but sounds like tps (throtle position senser) sorry about the spelling

(in reply to SUPERDUTYCHIC)

Post #: 8