Windstar power door lock problem

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

Windstar power door lock problem

Printable Version

Ford >> Past Ford Models >> Windstar/Aerostar >> Windstar power door lock problem

Page: [1]

Message

<< Older Topic Newer Topic >>

Windstar power door lock problem - 10/28/2007 8:35:46 PM

langfordja

Posts: 1
Score: 0
Joined: 10/28/2007
Status: offline

My 2001 Windstar power door locks do not work. They sound like they are working and the locks move a little but sometimes some of them work and sometimes they don't. Time of the year (temperature ?) seems to make a difference also. It also seems to have gotten worse over the years.

Any suggestions ?

Post #: 1

RE: Windstar power door lock problem - 3/27/2008 12:11:45 AM

jimmj43

Posts: 2
Score: 0
Joined: 3/26/2008
Status: offline

Ford, in its infinite wsdom(?), tries to save pennies by keeping wire use to a minimum. (Real: VERY little slack). Consequently, the harness places a varying (with temps - expansion/contraction) amount of stress on the PLASTIC receptacle the switches plug into. As those receptacles are stressed, 2 bad things can happed: (1) the receptacle's plastic body can crack & warp, which (2) puts additional stress on the actual metal switch pin receptacles and can cause them to deform - making for intermittent connections between switch pins and receptacle sockets.

Picture your hand, curved to hold an imaginary can of soda. Now slightly pry your fingers and thumb apart and your grip on that imaginary can would slip/fail. I use a dental probe as a strong & skinny little prybar to squeeze (slightly) together the two curved lengths of metal that are intended to securely grip the switch pins. did it as recently as today on my '92 Aerostar with an intermittent driver side window switch. Now good as new.

(in reply to langfordja)

Post #: 2