95 Ford f 250 diesel prob (Full Version)

Ford >> Ford Trucks, Ford Vans & Ford SUV's >> Ford F-250 & Ford F-350

95 Ford f 250 diesel prob

  

rescueman2 -> 95 Ford f 250 diesel prob (11/13/2007 7:16:21 AM)

I have a 95 diesel that is acting like it is running out of fuel going down the road.  At stop signs it will die sometimes and take a few cranks to start up again, like it is out of fuel.  I changed the fuel filter on top of the motor and dumped sea foam in the tanks to clean the injectors. Still does it, I have not checked for codes yet though.  I did change my fuel pump less than a year ago which I got from Oreillys.. I also change the rubber lines to the filter and washers at the banjo bolt.  Am I missing a fuel filter or fuel pump somewhere?  Any ideas?

  
david paul -> RE: 95 Ford f 250 diesel prob (11/13/2007 7:27:49 AM)

let me know also

rescueman2 -> RE: 95 Ford f 250 diesel prob (11/13/2007 12:49:59 PM)

Could this problem be a bad injector wire? I looked at everything I could see and nothing is loose or broke, I hope some one here has an idea of what it could be.. 

david paul -> RE: 95 Ford f 250 diesel prob (11/13/2007 2:09:35 PM)

I DONT KNOW BUT I SEE A LOT OF VALVE COVER GASKETS FOR SALE ON EBAY THAT MAY BE WHY EVERONE I SEE IS FOR THE POWER STROKE AND THE ARE MORE EXPENSIVE THAN REGULAR VALVE COVER GASKETS MAYBEE SOMEONE WILL LET U KNOW SOON

rescueman2 -> RE: 95 Ford f 250 diesel prob (11/15/2007 7:52:48 AM)

Do I need an OBD 1 or 2 reader to get codes?

BRETM -> RE: 95 Ford f 250 diesel prob (11/15/2007 9:05:18 AM)

IT COULD BE A CAM SENSOR EVERY 7.3 WORST NIGHTMARE WE SEE A TON OF THESE IN OUR DEALERSHIP.

rescueman2 -> RE: 95 Ford f 250 diesel prob (11/15/2007 11:18:36 AM)

Do I need to use a code reader or is there another way to find out if it is the Cam Sensor. 

BRETM -> RE: 95 Ford f 250 diesel prob (11/15/2007 12:31:05 PM)

you would need a scan tool and when it stalls crank engine over and watch to see if you get a rpm signal.I have one in stock it is only 14.91 www.discountedgenuinefordparts.com  not a bad place to start.

Hayapower -> RE: 95 Ford f 250 diesel prob (11/15/2007 1:56:14 PM)

If the CMP dies, you won't have an RPM signal at the dash tach either... CMP failures are common, and if the unit is the original wouldn't hurt to replace, but not the only thing to cause a stall.. After a stall, and a restart, does it run smooth?

rescueman2 -> RE: 95 Ford f 250 diesel prob (11/15/2007 6:55:25 PM)

yes it will run fine for a while, it seems like it does it when holding a constant speed or stopped to long.
Where is the CMP and can I change it?

  

Page: [1] 2 3   next >   >>

Return to Ford Forum home page or view the Full Version of this page.