95 Ford f 250 diesel prob

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

95 Ford f 250 diesel prob

Printable Version

Ford Forum >> Ford Trucks, Ford Vans & Ford SUV's >> Ford F-250 & Ford F-350 >> 95 Ford f 250 diesel prob

Page: [1] 2 3 next > >>

Message

<< Older Topic Newer Topic >>

95 Ford f 250 diesel prob - 11/13/2007 7:16:21 AM

rescueman2

Posts: 16
Score: 0
Joined: 11/9/2007
Status: offline

I have a 95 diesel that is acting like it is running out of fuel going down the road. At stop signs it will die sometimes and take a few cranks to start up again, like it is out of fuel. I changed the fuel filter on top of the motor and dumped sea foam in the tanks to clean the injectors. Still does it, I have not checked for codes yet though. I did change my fuel pump less than a year ago which I got from Oreillys.. I also change the rubber lines to the filter and washers at the banjo bolt. Am I missing a fuel filter or fuel pump somewhere? Any ideas?

Post #: 1

RE: 95 Ford f 250 diesel prob - 11/13/2007 7:27:49 AM

david paul

Posts: 217
Score: 0
Joined: 8/31/2007
Status: offline

let me know also

_____________________________

DAVID PAUL

(in reply to rescueman2)

Post #: 2

RE: 95 Ford f 250 diesel prob - 11/13/2007 12:49:59 PM

rescueman2

Posts: 16
Score: 0
Joined: 11/9/2007
Status: offline

Could this problem be a bad injector wire? I looked at everything I could see and nothing is loose or broke, I hope some one here has an idea of what it could be..

(in reply to david paul)

Post #: 3

RE: 95 Ford f 250 diesel prob - 11/13/2007 2:09:35 PM

david paul

Posts: 217
Score: 0
Joined: 8/31/2007
Status: offline

I DONT KNOW BUT I SEE A LOT OF VALVE COVER GASKETS FOR SALE ON EBAY THAT MAY BE WHY EVERONE I SEE IS FOR THE POWER STROKE AND THE ARE MORE EXPENSIVE THAN REGULAR VALVE COVER GASKETS MAYBEE SOMEONE WILL LET U KNOW SOON

_____________________________

DAVID PAUL

(in reply to rescueman2)

Post #: 4

RE: 95 Ford f 250 diesel prob - 11/15/2007 7:52:48 AM

rescueman2

Posts: 16
Score: 0
Joined: 11/9/2007
Status: offline

Do I need an OBD 1 or 2 reader to get codes?

(in reply to david paul)

Post #: 5

RE: 95 Ford f 250 diesel prob - 11/15/2007 9:05:18 AM

BRETM

Official Site Sponsor
Posts: 257
Score: 0
Joined: 11/9/2007
Status: offline

IT COULD BE A CAM SENSOR EVERY 7.3 WORST NIGHTMARE WE SEE A TON OF THESE IN OUR DEALERSHIP.

_____________________________

www.discountedgenuinefordparts.com

(in reply to rescueman2)

Post #: 6

RE: 95 Ford f 250 diesel prob - 11/15/2007 11:18:36 AM

rescueman2

Posts: 16
Score: 0
Joined: 11/9/2007
Status: offline

Do I need to use a code reader or is there another way to find out if it is the Cam Sensor.

(in reply to BRETM)

Post #: 7

RE: 95 Ford f 250 diesel prob - 11/15/2007 12:31:05 PM

BRETM

Official Site Sponsor
Posts: 257
Score: 0
Joined: 11/9/2007
Status: offline

you would need a scan tool and when it stalls crank engine over and watch to see if you get a rpm signal.I have one in stock it is only 14.91 www.discountedgenuinefordparts.com not a bad place to start.

_____________________________

www.discountedgenuinefordparts.com

(in reply to rescueman2)

Post #: 8

RE: 95 Ford f 250 diesel prob - 11/15/2007 1:56:14 PM

Hayapower

Posts: 1968
Score: 0
Joined: 7/22/2006
Status: offline

If the CMP dies, you won't have an RPM signal at the dash tach either... CMP failures are common, and if the unit is the original wouldn't hurt to replace, but not the only thing to cause a stall.. After a stall, and a restart, does it run smooth?

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to rescueman2)

Post #: 9

RE: 95 Ford f 250 diesel prob - 11/15/2007 6:55:25 PM

rescueman2

Posts: 16
Score: 0
Joined: 11/9/2007
Status: offline

yes it will run fine for a while, it seems like it does it when holding a constant speed or stopped to long.
Where is the CMP and can I change it?

(in reply to Hayapower)

Post #: 10