97 Sable No Turn Signals

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

97 Sable No Turn Signals

Printable Version

Ford Forum >> Ford Cars >> Ford Taurus >> 97 Sable No Turn Signals

Page: [1] 2 next > >>

Message

<< Older Topic Newer Topic >>

97 Sable No Turn Signals - 11/25/2007 7:00:47 PM

Big merc

Posts: 12
Score: 0
Joined: 11/25/2007
Status: offline

Hi, I'm new here an need help very bad.
Just bought my 1997 Sable an five days later the turn signals quit working, Plus my 4 ways dont work also.

I cant afford to go to a dealer, I'm on limited money.
Can anybody please help me?

Post #: 1

RE: 97 Sable No Turn Signals - 11/25/2007 7:39:18 PM

Hayapower

Posts: 1887
Score: 0
Joined: 7/22/2006
Status: online

Welcome to the site..

Did you already check the fuses in the I/P fuse box... Postion 25/15amp, and position 15/10amp.. Could be the muli function switch/electronic flasher, but the fuses should be checked if they haven't been checked as good...

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to Big merc)

Post #: 2

RE: 97 Sable No Turn Signals - 11/25/2007 7:47:28 PM

Big merc

Posts: 12
Score: 0
Joined: 11/25/2007
Status: offline

Thanks Much, it got to dark to check anything today.
I tried tinkering a bit,
When i hold down (very hard) the 4 way button an try the turn signals They work, as long as i hold the flasher button all the way down.
Wher is I/P box? Under dash? Under Hood?

(in reply to Hayapower)

Post #: 3

RE: 97 Sable No Turn Signals - 11/25/2007 10:17:43 PM

Hayapower

Posts: 1887
Score: 0
Joined: 7/22/2006
Status: online

The Instrument panel fuse box is under the left corner of the instrument cluster.. But,,, if you can force the turns/hazards to operate by manipulating the multifunction switch controls then it sounds like the multi function switch is going bad.. If the fuse/s were open, then the switch would be completely dead.. The mulit function switch is a common failure for a lot of models/builds... The multi function switch replacement is a simple job.. I can send you info if need be...

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to Big merc)

Post #: 4

RE: 97 Sable No Turn Signals - 11/25/2007 10:39:54 PM

Big merc

Posts: 12
Score: 0
Joined: 11/25/2007
Status: offline

Thanks,
PLEASE send me the info on the multi switch.

(in reply to Hayapower)

Post #: 5

RE: 97 Sable No Turn Signals - 11/26/2007 4:45:28 AM

way2old

Posts: 210
Score: 0
Joined: 1/4/2006
Status: offline

Try spraying a little penetrant down around the 4 way knob and work it a few times. We have gained some extra time on the switch by doing that.

_____________________________

People are like Slinkies. Not much use, but it still makes me smile whenever I see one tumble down the stairs.

(in reply to Big merc)

Post #: 6

RE: 97 Sable No Turn Signals - 11/26/2007 6:05:04 AM

Big merc

Posts: 12
Score: 0
Joined: 11/25/2007
Status: offline

quote:

ORIGINAL: way2old

Try spraying a little penetrant down around the 4 way knob and work it a few times. We have gained some extra time on the switch by doing that.

Thank You,......... But, can i short anything out in there by using too much?
Or will a contact cleaner (electrical) do any better than WD-40? I have both.

(in reply to way2old)

Post #: 7

RE: 97 Sable No Turn Signals - 11/26/2007 10:24:40 AM

Hayapower

Posts: 1887
Score: 0
Joined: 7/22/2006
Status: online

Worth a try..

It won't short out.. WD in WD40 stands for 'water displacement' and was designed to do just that in electrical environments.. But its a penetrant as well, and doesn't really second as a electronic lube like dielectric silcone/silicone based sprays ect.. Try giving it a light spray first with the electronic cleaner and follow up with the WD as a test.. A silcon based spray may be a better bet if the WD works.. Don't over spray as the run off lube will drip into the column and out of the column covers, generally on your legs ;(

If the treatment doesn't work, let me know and I'll send the replacement info along..

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to Big merc)

Post #: 8

RE: 97 Sable No Turn Signals - 11/26/2007 10:45:37 AM

Big merc

Posts: 12
Score: 0
Joined: 11/25/2007
Status: offline

quote:

ORIGINAL: Hayapower

Worth a try..

It won't short out.. WD in WD40 stands for 'water displacement' and was designed to do just that in electrical environments.. But its a penetrant as well, and doesn't really second as a electronic lube like dielectric silcone/silicone based sprays ect.. Try giving it a light spray first with the electronic cleaner and follow up with the WD as a test.. A silcon based spray may be a better bet if the WD works.. Don't over spray as the run off lube will drip into the column and out of the column covers, generally on your legs ;(

If the treatment doesn't work, let me know and I'll send the replacement info along..

OK, Heres where i'm at right now.
Went out an tried them a bit ago (Before you posted the above)
Pushed the 4 way button down an tried the signals, THEY WORKED, this time w/o holding the button down.
So this time i'm leaving the 4 ways button ON (DOWN) and Hope my 4 ways does not kick on when i'm in the house, Any chance of that happining??
As long as its working like this i think i'll hold off with spraying
anything now, Good Idea??
Thank You again for all your time with me on this.
I'll post updates as they happen.

< Message edited by Big merc -- 11/26/2007 10:46:32 AM >

(in reply to Hayapower)

Post #: 9

RE: 97 Sable No Turn Signals - 11/26/2007 1:05:21 PM

way2old

Posts: 210
Score: 0
Joined: 1/4/2006
Status: offline

I would go ahead and try to get them to work without the 4 way flashers turned on. Try spraying down in the button area and see if it will help you. Other recourse is to buy the multi function switch. Click here for switch and approximate price. Replacement is really easy also. Let us know.

_____________________________

People are like Slinkies. Not much use, but it still makes me smile whenever I see one tumble down the stairs.

(in reply to Big merc)

Post #: 10