RE: engine dont run... 6.0 powerstroke

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

RE: engine dont run... 6.0 powerstroke

Printable Version

Ford Forums >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Excursion >> RE: engine dont run... 6.0 powerstroke

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: engine dont run... 6.0 powerstroke - 12/7/2007 9:26:49 AM

Hayapower

Posts: 2082
Score: 0
Joined: 7/22/2006
Status: offline

Fuel control module is on the left frame rail, below the drivers position.. Pump pressure should be 45-58lbs or so...

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to bonboy)

Post #: 11

RE: engine dont run... 6.0 powerstroke - 12/7/2007 12:02:13 PM

BRETM

Official Site Sponsor
Posts: 257
Score: 0
Joined: 11/9/2007
Status: offline

The correct place to check the fuel pressure is at the secondary fuel filter housing next to the oil filter, but requires special adapter to do it. But I would not be worried about fuel pressure as much as oil pressure. I would suspect the STC (snap to connect) fitting on the rear of the high pressure pump or the branch tube in the block is leaking. Has been known concern on the 05-06 trucks and vans.

_____________________________

www.discountedgenuinefordparts.com

(in reply to Hayapower)