RE: 94 explorer won't start
Login | |
|
RE: 94 explorer won't start - 12/14/2007 5:32:19 PM
|
|
|
Hayapower
 Posts: 2082
Score: 0 Joined: 7/22/2006 Status: offline
|
The inertia wire colors S/B... DG/Y comming in from the closed 'energized' (hopefully) fuel pump relay,, PK/BK going out to the fuel pump from the inertia.. The GY/O is for the instrument cluster, but don't worry about the GY/O at this point.. Cycle,,, or better yet,, have someone cycle the key to the 'ON' position while you monitor the inertia voltage.. The PCM will be in control of the fuel pump relay and will 'time out' the power distribution in a few seconds so it may take a few cycles to read the voltage.. Look for 12V coming in on the DG/Y, and going 'out' on the PK/BK wires... You can check for spark up on the coil pack spark plug wire ends with a tester, or use a spare wire ect. or a decent gauge test lead and check for spark 'jump' on a ground location.....
_____________________________
05 F250 C/C FX4 6.0 1969 Firebird Trans Am 2003 Hayabusa GSXR1300
|
|
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Ford History
Mustang
Ford Prices
Ford Trucks & SUVs
F-150 Expedition
Ranger Explorer
Freestar F-Series
Explorer Sport Trac
Excursion Escape
Ford Cars
Five Hundred GT
Freestyle Mustang
Taurus Fusion
Thunderbird Focus
Advertising Info
|
Contact Us |
Link To Us |
Advertising |
Automotive Directory |
Archive |
Ford Links |
Legal |
Privacy Policy |
© Ford Forum
Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.
|