RE: Squealing Noise - Intermittant

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

RE: Squealing Noise - Intermittant

Printable Version

Ford Forum >> Ford Trucks, Ford Vans & Ford SUV's >> Ford F-250 & Ford F-350 >> RE: Squealing Noise - Intermittant

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: Squealing Noise - Intermittant - 7/12/2005 8:36:51 PM

littlelady

Posts: 7
Score: 0
Joined: 6/28/2005
Status: offline

I just looked at the paperwork when the dealership replaced the clutch. It was replaced Nov/99. The mileage was 55484, the truck now has 115,000 mi.
This is what the paperwork says:

7519A - Clutch Pedal Assembly - replace
1 Clutch Discs
1 Pressure Plate
1 Hub and Brg Asy-CL Rel
1 Brk & Cl Pdl & Brkt Asy
1 Switch Asy
7003A3 Clutch Pressure Plate, Disc or Pilot Bearing - Replace
7003A32 Hub and Bearing and/or Fork - Clutch Released - Replace

Not sure what all this means....

_____________________________

little-lady
1996 F350 Crew Cab

(in reply to littlelady)

Post #: 11

RE: Squealing Noise - Intermittant - 7/13/2005 7:54:55 PM

cctxfish

Posts: 735
Score: 0
Joined: 1/12/2005
Status: offline

Other then:
1 Brk & Cl Pdl & Brkt Asy
1 Switch Asy
All parts listed, are just a clutch kit. Hope your hubby has a lot of tools or is comfortable with removing trans.

(in reply to littlelady)

Post #: 12

RE: Squealing Noise - Intermittant - 7/14/2005 10:45:56 PM

Ramrod48

Posts: 608
Score: 0
Joined: 7/11/2005
Status: offline

you want to ask for a CLUTCH KIT,,,, comes with clutch disc, pressure plate, relase/throwout brg. pilot brg, an a cool lil tool to align the disc with the plate an flywheel,,,, You should remove the flywheel an take it a machine shop to get it trued,, This really isnt a bad job to do -- probaly will take a full day to get it done if this is your / his first time doing one ,,, You should get you a service manuel that will take you step by step to do it,,, Also you might want to go to WWW.AUTOZONE.COM you should be able to look up the info there, also your going to need a floor jack to remove an install the tranny -- you can rent a tranny jack at some rental stores,,, If you do the job yourself your looking at probaly $200.00,,, If you take it to a shop your probaly looking at $400.00 - $ 600.00

(in reply to littlelady)

Post #: 13

RE: Squealing Noise - Intermittant - 7/16/2005 1:14:16 PM

Fis Teck

Posts: 12
Score: 0
Joined: 5/31/2005
Status: offline

If you have a duel mass flywheel change it to a single mass by Luk and the dealer is the last place I would take it not to say they don't do a good job but they are always going to cost you more money. The single mass set up will cut peddel effort in half. If you do alot of intown driving you know what a pain it can be. The last one I did it cost about $1000.00.

< Message edited by Fis Teck -- 7/16/2005 1:19:37 PM >

(in reply to Ramrod48)

Post #: 14

RE: Squealing Noise - Intermittant - 10/7/2005 3:04:27 AM

waitn4ford

Posts: 9
Score: 0
Joined: 4/7/2005
Status: offline

Ya, By now the sound is likely the clutch release bearing. They usually last a while before letting go. But just a thought on prices your local transmission shop may be able