RE: explorer 1993 questions

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

RE: explorer 1993 questions

Printable Version

Ford >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Explorer >> RE: explorer 1993 questions

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: explorer 1993 questions - 1/12/2008 2:14:15 AM

gixxer32404

Posts: 78
Score: 0
Joined: 12/31/2007
Status: offline

ok, so I removed instrument panel cluster. Do I have to get cluster recalibrated since I disconnected guages and replaced the 194 bulbs? I also checked the ports for fuel, and temp guage and it lit up one out the 3 ports per guage. So I'm pretty satisfied that the fuel guage problem is the sending unit or float. So I plan to drive to lower my fuel then drop tank today or tommorrow and replace strainer, pump, float and sending unit as one assembly.

_____________________________

93 ford explorer 4door 4wd

(in reply to gixxer32404)

Post #: 11

RE: explorer 1993 questions - 1/12/2008 7:40:08 AM

oldtimer35

Posts: 333
Score: 0
Joined: 11/27/2007
Status: offline

Just plug everything back in and reinstall the cluster, be the same as before you removed it. Luck on dropping the tank, just be careful and it will go ok.

(in reply to gixxer32404)

Post #: 12

RE: explorer 1993 questions - 1/13/2008 5:57:28 PM

gixxer32404

Posts: 78
Score: 0
Joined: 12/31/2007
Status: offline

replaced fuelpump,sending unit, float it's fixed now.the quick connect for fuel lines are not quick.and a pain in the ass.

_____________________________

93 ford explorer 4door 4wd

(in reply to oldtimer35)

Post #: 13

RE: explorer 1993 questions - 1/14/2008 10:07:03 AM

oldtimer35

Posts: 333
Score: 0
Joined: 11/27/2007
Status: offline

They are quick if you have the right tool. Glad it's fixed.

(in reply to gixxer32404)

Post #: 14

RE: explorer 1993 questions - 1/26/2008 9:56:05 AM

gixxer32404

Posts: 78
Score: 0
Joined: 12/31/2007
Status: offline

i bought a tool from advance and auto zone........but the prongs inside fitting was bent holding fitting on,also . what's the right tool?

_____________________________

93 ford explorer 4door 4wd

(in reply to oldtimer35)

Post #: 15

RE: explorer 1993 questions - 1/28/2008 12:08:48 PM

oldtimer35

Posts: 333
Score: 0
Joined: 11/27/2007
Status: offline

Forgot the part number for the tool, but it fits over the fuel line and slides up into the connector. Sometimes it is stubborn and you have to push the line toward the connector and force the tool into it, then it will come off.

(in reply to gixxer32404)

Post #: 16