2004 Freestar rear lift gate handle

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

2004 Freestar rear lift gate handle

Printable Version

Ford Forum >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Freestar >> 2004 Freestar rear lift gate handle

Page: [1]

Message

<< Older Topic Newer Topic >>

2004 Freestar rear lift gate handle - 2/24/2008 3:46:09 AM

2004freestarmatt

Posts: 8
Score: 0
Joined: 11/19/2007
Status: offline

Yesterday, my wife went to open the rear lift gate of our 2004 Freestar and she ended up with the handle in her hand. The door didn't open and the handle pulled right out of the door. I was able to open the door by reaching in on hole with pliers and pulling on the tab. It looks like the tabs slid sideways and the hooks on the handle slipped off the tabs. Has anyone had this problem? It looks like I will have to take the panel off the door and see what's going on. Any help would be appreciated. Thanks.

Post #: 1

RE: 2004 Freestar rear lift gate handle - 2/24/2008 10:03:27 AM

Hayapower

Posts: 1828
Score: 0
Joined: 7/22/2006
Status: offline

To replace the liftgate release handle, you'll need to remove the license plate mounting/housing, as well as the interior trim panel for the gate.. I can send you the info if needed..

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to 2004freestarmatt)

Post #: 2

RE: 2004 Freestar rear lift gate handle - 2/24/2008 10:17:56 AM

2004freestarmatt

Posts: 8
Score: 0
Joined: 11/19/2007
Status: offline

Any info you could send me would be great, my email is malewis@nbpower.com
Thanks,

(in reply to Hayapower)

Post #: 3

RE: 2004 Freestar rear lift gate handle - 3/19/2008 4:49:38 PM

gipper75

Posts: 1
Score: 0
Joined: 3/19/2008
Status: offline

I have the same problem. The handle just came off. I took it by the dealership today and was told that something inside was probably broke and they had to order the entire handle assembly which would be $251. Then I'd have to pay to paint the handle to match (about $50) because the new handle would be crome. And of course, I'd have to pay for the labor. But they weren't sure how long it would take since right now there is no way to open the door. They assumed they would have to do it from the inside by removing the inside panel but they haven't had this kind of repair before. They did comment that it might be possible to reuse the handle because they didn't think it was broken and then I would not have to pay to have the new one painted.

Is is possible that nothing is broken and that the handle just slipped off the hooks?

(in reply to 2004freestarmatt)

Post #: 4

RE: 2004 Freestar rear lift gate handle - 3/24/2008 7:47:16 PM

2004freestarmatt

Posts: 8
Score: 0
Joined: 11/19/2007
Status: offline

Yes, it is possible for the handle to come out without breaking anything. There is a shaft inside the rear lift gate that has hooks on it that engage in the two slots on the sides of the handle prongs. What happened to my handle is that this shaft slid sidways and allowed the handle to come off. To re-attach the handle, I removed the panel on the rear lift gate and slid this shaft sideways to re-engage the hooks into the slots of the handle prongs. You have to do something to keep this shaft from sliding sideways to keep this from happening again. I used a washer and a very small tack weld. Thanks to HAYAPOWER for the schematics and info! You can re-attach this handle without removing the inside panel by opening the small cover on the inside panel to access the lock. Through this hole, you can push on the hooks to re-engage them into the handle. This is easier once you have removed the panel once and know what you are looking at. Good Luck!

(in reply to gipper75)

Post #: 5

RE: 2004 Freestar rear lift gate handle - 4/9/2008 9:28:04 AM

kmahlerjr

Posts: 1
Score: 0
Joined: 4/9/2008
Status: offline

I have had the same problem witht he liftgate handle. I went to open it and the handle came right off into my hands. No I am struggling trying to put it back in. If I come up with any ideas, I'll let you know. Please let me know if anyone has had any luck fixing it.

(in reply to 2004freestarmatt)

Post #: 6

RE: 2004 Freestar rear lift gate handle - 4/27/2008 5:45:38 AM

carebear3030

Posts: 2
Score: 0
Joined: 7/21/2005
Status: offline

The same happened last night to me!!!! Please someone help! Please email directions to repair to carebear3030@gmail.com.

(in reply to kmahlerjr)

Post #: 7

RE: 2004 Freestar rear lift gate handle - 4/28/2008 9:51:53 AM

Hayapower

Posts: 1828
Score: 0
Joined: 7/22/2006
Status: offline

Sent..

_____________________________

05 F250 C/C FX4 6.0
1969 Firebird Trans Am
2003 Hayabusa GSXR1300

(in reply to carebear3030)

Post #: 8

RE: 2004 Freestar rear lift gate handle - 5/20/2008 4:30:59 PM

Redcloud

Posts: 1
Score: 0
Joined: 5/20/2008
Status: offline

I am also having the same problem with my 2005 Freestar! The rear lift gate handle has come off. Nothing is broken. From the discussion, I must take off the rear panel to get to a place where I can correct the problem from the inside. Any directions on the removal of the panel would be helpful. Thanks

(in reply to Hayapower)

Post #: 9

RE: 2004 Freestar rear lift gate handle - 6/11/2008 11:18:28 AM

DamselDeb

Posts: 1
Score: 0
Joined: 6/11/2008
Status: offline

Could you please send this information to me: dnance@gerbercollision.com

Thank you!

(in reply to Hayapower)

Post #: 10