ASK THE FORD PARTS MAN (Full Version)

Ford Forums >> General Ford Forums >> General Tech

ASK THE FORD PARTS MAN

  

BRETM -> ASK THE FORD PARTS MAN (2/26/2008 2:45:34 PM)

HERE TO HELP SAVE EVERYONE SOME DOUGH.FORD PART NUMBERS OR PRICING EMAIL ME OR LOOK AT OUR ONLINE CATALOG. I'AM ONLY A PARTS GUY NOT A TECH.BUT THERE ARE SOME VERY TALENTED GUYS ON THIS FORUM SUCH AS OLDTYMER AND HAYAPOWER THAT CAN HELP WITH THAT I CAN HELP WITH THE REST.

  
techmanbd -> RE: ASK THE FORD PARTS MAN (2/26/2008 4:50:00 PM)

I can't get on your site from work, blocked it saying "suspicious". Firewall work thing.[8D]

so I will ask here. I have an 06 Mustang GT with the IUP, I broke the chrome ring that goes on the vent. Do you have a price and part number on that?

BRETM -> RE: ASK THE FORD PARTS MAN (2/26/2008 5:21:43 PM)

Is it the one on the dash vents ? 

BRETM -> RE: ASK THE FORD PARTS MAN (2/26/2008 7:01:21 PM)

[image]http://www.trademotion.com/schematics/J/JC05420.gif[/image] 

techmanbd -> RE: ASK THE FORD PARTS MAN (2/26/2008 7:09:39 PM)

It is the chrome ring that is on the dash vent.  In the picture the chrome piece is not there  where teh gauge is, if you look over to the  right you can see part of the chrome piece  from the other vent. Thanks.

[img]http://i54.photobucket.com/albums/g107/techmanbd/Mustang/VentPod4.jpg[/img]

BRETM -> RE: ASK THE FORD PARTS MAN (2/26/2008 7:27:21 PM)

I like how you mounted that it looks sweet. possible #5 in above pic if so it will be that whole center piece which is 67.00 but not sure.I will have to look it up at work in the am i will get back to you @8:30 am

BRETM -> RE: ASK THE FORD PARTS MAN (2/27/2008 9:05:36 AM)

Bad news buddy it is that entire center piece I would need your vin to get the right price/pn for you.

techmanbd -> RE: ASK THE FORD PARTS MAN (2/27/2008 9:16:31 AM)

I want to thank you for your help, but sorry, I think I will pass. I broke the tabs that are on the back that keep it on, if I could have just got that piece that would have been great, but I might as well just super glue it back on which is what I wanted to avoid in case I ever decide to get rid of the gauge and put the vent cover back in.

Thanks again.

BRETM -> RE: ASK THE FORD PARTS MAN (2/27/2008 9:24:46 AM)

I UNDERSTAND I WOULD DO THE SAME THING.

kermitsst45 -> RE: ASK THE FORD PARTS MAN (2/29/2008 9:24:51 PM)

Okay Parts Man lets see what ya got. I'm looking to convert my 351W heads to from stamped rocker arms to the roller type. What I need to know is part #'s and pricing. The rig is a 1991 E-250 351W w/EFI Auto Trans. no air swivel buckets and missing one wiper. Alright small joke about the wiper. I'd like to swap the camshaft but the EFI and computer is the problem got a good recomendation?

  

Page: [1] 2   next >   >>

Return to Ford Forum home page or view the Full Version of this page.