ford 5.0 parts

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

ford 5.0 parts

Printable Version

Ford Forum >> Brand Review >> Intake, Headers and Exhaust >> ford 5.0 parts

Page: [1]

Message

<< Older Topic Newer Topic >>

ford 5.0 parts - 7/16/2005 1:13:47 PM

havacru

Posts: 2
Score: 0
Joined: 7/16/2005
Status: offline

i have a 93 f150 with a 302 5.0, i was wondering if parts were interchangeable such as intake with the 5.0 mustang engine. any info would help.

Post #: 1

RE: ford 5.0 parts - 7/16/2005 11:34:43 PM

Ramrod48

Posts: 608
Score: 0
Joined: 7/11/2005
Status: offline

What you trying to do give the truck a lil Ho ? , yes the lower intake can be swapped

(in reply to havacru)

Post #: 2

RE: ford 5.0 parts - 7/20/2005 2:05:40 PM

havacru

Posts: 2
Score: 0
Joined: 7/16/2005
Status: offline

im pretty much trying to make my 302 block a mustang HO block because there are more parts available for a HO 302 then a regular 302.

(in reply to havacru)

Post #: 3

RE: ford 5.0 parts - 7/21/2005 10:58:59 AM

Ramrod48

Posts: 608
Score: 0
Joined: 7/11/2005
Status: offline

ok, you need the following things from a H.O., the computer, the cam, the injectors, the heads from your truck motor should be the same I belive, They should have the casting # E7TE on them,, you will need the headers from a H.O. or get you a set of aftermarket ones, check your firing order ? it will have to be changed to 1-3-7-2-6-5-4-8 , thats cause of the cam , the computer will change the injector firing order its self for you , Does your truck have a Mass Air Meter ?, On the upper air housing, the truck one is quite diff from a car, Iam sure you can adapt it as needed I've never done one on a truck. , if you go with the car upper air housing get the 60 MM throttle body ,

(in reply to havacru)

Post #: 4