power window motor (Full Version)

Ford Forums >> Past Ford Models >> Windstar/Aerostar

power window motor

  

roeboat109 -> power window motor (3/16/2008 12:46:57 PM)





Im replacing a 98 windstar power window motor passenger front side.
when i take out the motor and regulator can i tape the gear and bracket the motor that held them together real tight ?will that be good enough to hold the window from coming down? i mean use furnace tape or etc.good tape.  or should i tape the track that the window is actually in or at least put something in there to hold it up? any help would be appreciatted. thanks



  
Hayapower -> RE: power window motor (3/16/2008 1:50:28 PM)

Easy way to hold the window full up or in place/position, is to use duct tape and tape a good 'vertical lenght' of the inside portion of the glass (or mutiple), running the tape over the door/window frame (cover the painted surface) and then on down the outer glass surface.. With frameless glass applications, a strip of duct tape on the 'outside felt strip'  running the lenght of the glass or a good portion of, will usually hold it from dropping..

roeboat109 -> RE: power window motor (3/27/2008 10:03:20 AM)




also on a 98 can i just replace the window motor without taking anything else out ?just taping or making sure the window glass does not come down. when i remove motor will the gear and spring remain intact or not? on mine it looks like it should. i just hope i dont have trouble getting the motor back in if you say this should work. thanks for a reply.



roeboat109 -> RE: power window motor (5/16/2008 6:37:39 PM)




How can i lower the passenger door window a couple of inches? i havent been able to budge it at all.   i have a new power window motor for it. Im trying to put in the motor without taking out the regulator. i was told i could  lower the window  enough to move the motor and reg. up where the speaker hole is where i can get to it.



roeboat109 -> RE: power window motor (5/28/2008 4:04:44 PM)




I got it done .thanks for everyones help.[:D]



  

Page: [1]

Return to Ford Forum home page or view the Full Version of this page.