Suggestions for aftermarket rotors - stock/Ford parts suck (Full Version)

Ford >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Freestar

Suggestions for aftermarket rotors - stock/Ford parts suck

  

jcasaccio -> Suggestions for aftermarket rotors - stock/Ford parts suck (3/25/2008 12:22:53 PM)

Hi all -

Any suggestions for better than OEM rotors?  I looked at FrozenRotors and they seem good.   The stock rotors warp so easily and it's annoying - 35k on van and dealer has replaced rotors 3x under warranty.   Next time I will do the brakes myself and want better parts.  Any suggestions or experience with other rotors is appreciated.

Thx
Jack

  
Use Common Sense -> RE: Suggestions for aftermarket rotors - stock/Ford parts suck (3/26/2008 4:34:47 AM)

What year Freestar?  Which rotors?

Your problem may be with the calipers.  I know the 2004 Freestars had an issue with the front calipers hanging up causing the brakes to overheat and warp the rotors.  The rear calipers would hang up and cause excessive brake/rotor wear.  I had the calipers, pads and rotors replaced 3 times under warranty on my 04 until they finally installed the updated calipers.  I'm looking at getting some drilled units and ceramic pads for a four corners this spring.  Haven't chosen any MFGs yet.

jcasaccio -> RE: Suggestions for aftermarket rotors - stock/Ford parts suck (3/26/2008 8:22:28 AM)

It's a 2006, and I will prob just do all 4 at the same time.

tomb1269 -> RE: Suggestions for aftermarket rotors - stock/Ford parts suck (3/26/2008 9:58:55 AM)

I have an 06 as well, live 15 miles from NYC. Wife is a brake dragger (ie I get 45-60k on non metallic she get 35-45K on the same type of pads). I have just about 30K, of which 6k has been towing an 1800lb popup. I have not had any issues with the brakes and am on the original pads.

Octane -> RE: Suggestions for aftermarket rotors - stock/Ford parts suck (3/26/2008 2:16:29 PM)

Ive always had good luck with Carquest rotors.  Just make sure you get the good American-made ones, not the cheap Chinese ones.

  

Page: [1]

Return to Ford Forum home page or view the Full Version of this page.