Replaced PS Pump on 02 Windstar, but still now power steering
Login | |
|
Replaced PS Pump on 02 Windstar, but still now power st... - 4/2/2008 6:50:32 PM
|
|
|
ryche
Posts: 4
Score: 0 Joined: 6/27/2006 Status: offline
|
The power steering has been acting up on my 02 windstar, so i replaced the power steering pump, but its still stiff and very hard to turn... Anytime in the past whenever i had a ps problem, i'd replace the pump of whatever vehicle and all would be fine.. but not this van... What other component could be the issue that my steering is acting this way.. in the begining of it acting up, it would get tight, like the ps would just vanish, than show right back up again, but no longer... it's gone for good.. there is no leak, i used a new ps pump, pulley, fluid... you can see the fluid flowing when you look in the resevoir... any help would be highlly appreciated..
|
|
|
|
|
|
RE: Replaced PS Pump on 02 Windstar, but still now powe... - 4/2/2008 7:02:34 PM
|
|
|
Hayapower
 Posts: 2082
Score: 0 Joined: 7/22/2006 Status: offline
|
Could be a dead rack.. Sometimes as they start to go bad, you'll get a 'sleepy rack' where the P/S has high effort cold, or may be in one direction only during R/L turning and then as the fluid heats the rack will work as it should.. Any indication prior to the complete assist failure? how many miles on the van?
_____________________________
05 F250 C/C FX4 6.0 1969 Firebird Trans Am 2003 Hayabusa GSXR1300
|
|
|
|
Contact Us |
Link To Us |
Advertising |
Automotive Directory |
Archive |
Ford Links |
Legal |
Privacy Policy |
© Ford Forum
Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.
|