Keyless entry code

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

Keyless entry code

Printable Version

Ford Forums >> Past Ford Models >> Windstar/Aerostar >> Keyless entry code

Page: [1]

Message

<< Older Topic Newer Topic >>

Keyless entry code - 5/6/2004 2:49:33 PM

leo2947

Posts: 1
Score: 0
Joined: 5/6/2004
Status: offline

I have a 1995 Windstar with keyless entry. How I can find out the code? I looked the places recommended in the Manual (glove box, engine control module) but found nothing.
Is it possible to recover the code based on the known vehicle number?

Post #: 1

RE: Keyless entry code - 7/7/2005 10:21:15 PM

jkeaton

Posts: 2
Score: 0
Joined: 7/7/2005
Status: offline

I have a 2001 with the same problem. Dealer wants $75.00 to hook it up to a scanner. I understand the cost associated with such equipment and the need to pass this cost on to the consumer, but there has to be a cheaper/easier way since these vehicles do change hands every now and then. I am not sure of the location of the computer module, I have found several of them. It's supposed to be taped to it, but I don't know where it is. I have looked behind the lower storage bin below the instrument panel, but no luck. Anyone else??

(in reply to leo2947)

Post #: 2

RE: Keyless entry code - 7/8/2005 2:43:40 PM

hockeyhitman69

Posts: 298
Score: 0
Joined: 5/27/2005
Status: offline

you can look but you will not find the only way is to use a scanner .sorryi do agree 75 is a little to steep.

(in reply to jkeaton)

Post #: 3

RE: Keyless entry code - 10/3/2006 3:15:10 PM

windstar

Posts: 4
Score: 0
Joined: 10/3/2006
Status: offline

hockeyhitman69 Date 7/8/2005 2:43:40 PM
you can look but you will not find the only way is to use a scanner .sorryi do agree 75 is a little to steep.

Is this for a 2001 or all of them 95 +??

(in reply to hockeyhitman69)

Post #: 4

RE: Keyless entry code - 12/30/2006 4:51:05 AM

Rockinwindstar

Posts: 8
Score: 0
Joined: 12/30/2006
Status: offline

Guys 50-75 dollars is cheap, the machine is like 1300, and you cant do it, it takes the guys at the shop 30 min, 75 minus 25 for labor and then minus the cost of having the service bay and they still have 5000 a month to go for rent... locksmiths charge 100 just to scan the sys, most shops charge 50, and the dealer charges 75 ... choose the better evil.

(in reply to windstar)

Post #: 5

RE: Keyless entry code - 2/28/2007 6:17:42 PM

Rivalry

Posts: 5
Score: 0
Joined: 5/7/2006
Status: offline

Yes unfortunately if the code is lost and noone knows, the only was is to have the dealership get it. Keep in mind, that not only can they get it for you they can change it to whatever you want it to be.

(in reply to Rockinwindstar)

Post #: 6

RE: Keyless entry code - 3/5/2007 2:02:35 PM

tomb1269

Posts: 182
Score: 0
Joined: 11/21/2006
Status: offline

My 95 Windstar had a sticker in the glove box with the factory 5 digit code. This is the code you need to reset personal code........

_____________________________

Tom
2006 Freestar SEL 4.2L F/Ld
2002 Ranger Edge 3.0L extd
2005 Jayco 806 P/U trailer - eaten by mice winter 2008

(in reply to Rivalry)

Post #: 7