camber change on alignment...

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

camber change on alignment...

Printable Version

Ford Forum >> Past Ford Models >> Windstar/Aerostar >> camber change on alignment...

Page: [1]

Message

<< Older Topic Newer Topic >>

camber change on alignment... - 4/22/2008 5:31:28 PM

rcoelho

Posts: 7
Score: 0
Joined: 2/18/2008
Status: offline

hi pros,
how I change the camber from positive to 0 on my 89 Ford Aerostar an 01 T&C?
thanks

Post #: 1

RE: camber change on alignment... - 4/22/2008 5:59:40 PM

jr78

Posts: 80
Score: 0
Joined: 12/5/2007
Status: online

There are shims on the upper control arm. Adding shims equally to the ft and back of the arm should lower your camber. There is a special tool to get to the nuts that allow you add or remove the shims, although you may be able to do it without it. You will need shims too.

(in reply to rcoelho)

Post #: 2