T-CASE WILL NOT ENGAGE

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

T-CASE WILL NOT ENGAGE

Printable Version

Ford Forum >> Past Ford Models >> Ford Bronco >> T-CASE WILL NOT ENGAGE

Page: [1]

Message

<< Older Topic Newer Topic >>

T-CASE WILL NOT ENGAGE - 5/17/2008 10:49:25 AM

MOKIEN

Posts: 1
Score: 0
Joined: 2/10/2008
Status: offline

I have a 1993 ford bronco with a push button control and when I push on the button to activate the 4x4 I hear a clicking sound coming from the electronic control module and the transfer case does not go into 4x4. I did a self check on the control module and it said it was good. What else can be wrong and how do I check it. I have a Borg-Warner 13-56 transfer case, the truck had automatic hubs and now it has manual hubs

Post #: 1

RE: T-CASE WILL NOT ENGAGE - 5/19/2008 1:18:11 PM

Bullitt94

Posts: 486
Score: 0
Joined: 8/18/2005
Status: offline

It could be the motor in the transfer case or a bad solenoid to engage the front differential. If you have someone who can drive the truck while you are able to look underneath it, put it in 4WD and roll forward. If the front drive shaft is spinning, then the solenoid needs cleaning or replacing. If it doesn't spin, then the electric motor is possibly bad. Try unhooking the battery for a while and see if it will respond before replacing anything.

_____________________________

1994 Ford Mustang GT
1990 Ford F-150
2001 Lincoln LS V8
1970 Ford Bronco
2006 Harley-Davidson Sportster Custom
1990 Ford Bronco II

If you don''t already own a Ford (or Ford owned product), get one.

(in reply to MOKIEN)

Post #: 2