Ford Forum  
Ford Forum   Ford Classifieds   Photo Gallery   Member List   Search   Ford Recalls   Contact FF   Sponsors
  Ford News   Ford Lineup   Forum FAQ   Calendars   Ford TSB's   Register   Login  

A/C Compressor Clutch Replace ??? Part 2

  Printable Version
Ford >> General Ford Forums >> General Tech >> A/C Compressor Clutch Replace ??? Part 2 Page: [1]
Login
Message << Older Topic   Newer Topic >>
A/C Compressor Clutch Replace ??? Part 2 - 6/1/2008 9:11:23 AM   
chemoman

 

Posts: 29
Score: 0
Joined: 10/13/2007
Status: offline
Is this how to link pretty much the same for my 00 F250 5.4L.
http://autorepair.about.com/library/faqs/bl168i.htm

< Message edited by chemoman -- 6/7/2008 10:17:19 AM >
Post #: 1
RE: A/C Compressor Clutch Replace ??? - 6/2/2008 2:37:14 AM   
Use Common Sense

 

Posts: 472
Score: 0
Joined: 1/12/2007
Status: online
Yep, the link pretty much covers it.  In case you didn't know, you don't need to pull the compressor to replace the clutch.

_____________________________

2004 Freestar Limited 4.2 V6 w/Water Injection & Iridium plugs
2008 Mercury Sable 3.5 V6 w/Opened Air Box

AMSOIL Lubricants and Filters in everything

"Have a good day, and a better one tomorrow"

(in reply to chemoman)
Post #: 2
RE: A/C Compressor Clutch Replace ??? - 6/2/2008 5:29:05 PM   
Davetheslave

 

Posts: 28
Score: 0
Joined: 8/9/2006
Status: offline
Did you fix your clutch maybe that is what is wrong with mine.

(in reply to chemoman)
Post #: 3
RE: A/C Compressor Clutch Replace ??? - 6/4/2008 6:58:56 AM   
chemoman

 

Posts: 29
Score: 0
Joined: 10/13/2007
Status: offline
quote:

ORIGINAL: Use Common Sense

Yep, the link pretty much covers it.  In case you didn't know, you don't need to pull the compressor to replace the clutch.

Thanks. I wasn't sure about having to remove the compressor, but I always try the easy way first. That's just the kinda lazy guy I am.

And
No, I haven't done it yet. I was waiting until it got really good and hot here in DFW so I can get a good sweat going. I'll do it Saturday and post up how it went.

(in reply to Use Common Sense)
Post #: 4
RE: A/C Compressor Clutch Replace ??? - 6/4/2008 3:57:17 PM   
Davetheslave

 

Posts: 28
Score: 0
Joined: 8/9/2006
Status: offline
Is and or was your clutch spinning? \\; Hey, it would be cool if you did a video of changing it.,

(in reply to chemoman)
Post #: 5
RE: A/C Compressor Clutch Replace ??? - 6/7/2008 10:13:12 AM   
chemoman

 

Posts: 29
Score: 0
Joined: 10/13/2007
Status: offline
I''m stuck! I got the clutch plate, pully and bearing off fine, but this thing is kicking my tail!
It must come off because there''s a new one in the box with the rest of the assembly.
Any help would be greatly appreciated.

http://i225.photobucket.com/albums/dd265/chemoman65/2008_0606clutch0015.jpg
http://i225.photobucket.com/albums/dd265/chemoman65/2008_0606clutch0016.jpg

(in reply to chemoman)
Post #: 6
RE: A/C Compressor Clutch Replace ??? - 6/7/2008 2:41:42 PM   
chemoman

 

Posts: 29
Score: 0
Joined: 10/13/2007
Status: offline
Well, I had about 25 minutes of how too with pics attached. Clicked "OK" and got some stupid error message that the page cannot be displayed. What a crock!
Oh well, I''ll try again later.
Here is my other Ford
http://i225.photobucket.com/albums/dd265/chemoman65/2008_0607clutch0025.jpg

< Message edited by chemoman -- 6/7/2008 2:45:20 PM >

(in reply to chemoman)
Post #: 7
RE: A/C Compressor Clutch Replace ??? Part 2 - 6/9/2008 8:43:46 AM   
Use Common Sense

 

Posts: 472
Score: 0
Joined: 1/12/2007
Status: online
The coil is a tight fit on the shaft.  Age just adds to the fun.  it may need a little coaxing from a couple of screw drivers or small pry bars.  Sometimes a puller with small "J" hook jaws works well.  Don''t forget to gauge your existing shims for proper re-install clearance.  This will ball park you for the new ones for proper clearance between the clutch face and pulley.  I try to stay between .015 & .030 thousands.  Good luck

_____________________________

2004 Freestar Limited 4.2 V6 w/Water Injection & Iridium plugs
2008 Mercury Sable 3.5 V6 w/Opened Air Box

AMSOIL Lubricants and Filters in everything

"Have a good day, and a better one tomorrow"

(in reply to chemoman)
Post #: 8
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Ford Forum >> General Ford Forums >> General Tech
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
hayapower1889
goinstrong914
techmanbd866
94 4x4 range834
cctxfish735
ramrod48608
use common s472
wheelsup68431
bullitt94430
mulletman343

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.