95 ranger no spark

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

95 ranger no spark

Printable Version

Ford >> Ford Trucks, Ford Vans & Ford SUV's >> Ford Ranger >> 95 ranger no spark

Page: [1]

Message

<< Older Topic Newer Topic >>

95 ranger no spark - 7/30/2005 2:23:15 PM

joe_dingo2002

Posts: 2
Score: 0
Joined: 7/30/2005
Status: offline

I have a 95 ranger and it will not spark i have changed spark plugs and cables and i have also changed the coil and still no spark the battery seems to be working fine. If anyone has any suggestions it would be greatly appeciated.

< Message edited by joe_dingo2002 -- 7/30/2005 3:19:26 PM >

Post #: 1

RE: 95 ranger no spark - 7/30/2005 4:16:48 PM

Ramrod48

Posts: 608
Score: 0
Joined: 7/11/2005
Status: offline

Sounds like u hve a failed crank sensor. try this weg site has some good info should put you in the rite direction ,,,, http://www.autozone.com/servlet/UiBroker?UseCase=L001&UserAction=viewHomePage, just fill in your vechile info

(in reply to joe_dingo2002)

Post #: 2

RE: 95 ranger no spark - 7/30/2005 6:06:05 PM

joe_dingo2002

Posts: 2
Score: 0
Joined: 7/30/2005
Status: offline

Yea i have been to that site and thanks for the suggestion. but just to be sure could there be anything else that could be wrong. Just want to make sure there isnt anything i overlooked so i dont go and waste money taking to a shop or to get parts. Just want to make sure I covered all possibilities.

(in reply to Ramrod48)

Post #: 3

RE: 95 ranger no spark - 7/31/2005 4:27:32 PM

dngrrngr93

Posts: 24
Score: 0
Joined: 7/25/2005
Status: offline

my 93 ranger did the same and it was the fuel pump. so that might be it.

(in reply to joe_dingo2002)

Post #: 4

RE: 95 ranger no spark - 8/1/2005 11:09:01 AM

cctxfish

Posts: 735
Score: 0
Joined: 1/12/2005
Status: offline

Will not start? fuel pump might be the problem. Will not spark, no way can be the fuel pump.
I'm with ramrod on this one crank postion sensor or loose wire connector somewhere