DPFE Hardshell connector

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

DPFE Hardshell connector

Printable Version

Ford Forums >> Ford Cars >> Ford Taurus >> DPFE Hardshell connector

Page: [1]

Message

<< Older Topic Newer Topic >>

DPFE Hardshell connector - 9/5/2008 10:00:20 PM

RBR

Posts: 3
Score: 0
Joined: 9/5/2008
Status: offline

Hello: I have a small problem. I have a 1995 Ford Taurus 3.0L SOHC engine. I am replacing the DPFE sensor and the small hose attatched to it. The hardshell connector is also damaged from heat. I have removed all 3 pins/wires from the connector and upon examination they are all good. The connector on the other hand is no good. Where can I purchase this connector as the local dealer reports they are obsolete from Ford? Thanks in advance. PS I would prefer to use a new one as opposed to a used one from an autowrecker.

_____________________________

Built Ford Tough

Post #: 1

RE: DPFE Hardshell connector - 9/6/2008 11:49:33 AM

way2old

Posts: 264
Score: 0
Joined: 1/4/2006
Status: offline

Click here for Motorcraft part numbert and picture. It may be available aftermarket. Or you can search www.motorcraft.com for your parts and order them on line. They are under emissions/fuel then emission parts. Scroll down to the connector.

< Message edited by way2old -- 9/6/2008 11:52:09 AM >

_____________________________

People are like Slinkies. Not much use, but it still makes me smile whenever I see one tumble down the stairs.

(in reply to RBR)

Post #: 2

RE: DPFE Hardshell connector - 9/7/2008 3:41:14 PM

RBR

Posts: 3
Score: 0
Joined: 9/5/2008
Status: offline

Thanks a million way2old! That''s exactly what I''m looking for. That saves me a heap of time and effort.

_____________________________

Built Ford Tough

(in reply to way2old)

Post #: 3