Ford Forum  
Ford Forum   Ford Classifieds   Photo Gallery   Member List   Search   Ford Recalls   Contact FF   Sponsors
  Ford News   Ford Lineup   Forum FAQ   Calendars   Ford TSB's   Register   Login  

02 Grand Marq EGR help

  Printable Version
Ford >> General Ford Forums >> General Tech >> 02 Grand Marq EGR help Page: [1]
Login
Message << Older Topic   Newer Topic >>
02 Grand Marq EGR help - 8/22/2004 7:34:08 AM   
kspencer

 

Posts: 1
Score: 0
Joined: 8/22/2004
Status: offline
Hello all, I was having stalling problems so I checked the codes and it was showing EGR insufficient and Excessive EGR. So I changed the EGR. No more stalling, but it is rough cold and the codes have been reset with insufficient and excessive EGR. Any thoughts. Thanks
Post #: 1
RE: 02 Grand Marq EGR help - 11/22/2004 8:46:42 AM   
josser

 

Posts: 143
Score: 0
Joined: 11/19/2004
Status: offline
check all those little hoses connected to the EGR valve and system, Clean them out, then check your EGR positioning sensor and your throtle positioning sensor, make sure they are clean or replace. I had the same problem with my ranger I replaced the EGR valve and the light still came on then I replaced the other 2 sensors and it works wonderfuly

(in reply to kspencer)
Post #: 2
RE: 02 Grand Marq EGR help - 2/5/2005 12:33:14 AM   
eL Dude

 

Posts: 10
Score: 0
Joined: 2/4/2005
Status: offline
I don't know how many miles you have on it, but I've seen a lot of build-up inside the trottle body of higher mileage Crown Vic's (same powertrain) to the point that the EGR port was completely clogged.

Some spray fuel injector cleaner may provide a short term fix, but taking it apart for a good cleaning is better. Please don't wash the TP Sensor.

_____________________________

`98 Windstar, 115k mi
`96 Crown Vic Police Interceptor, 352k mi

first car,
`70 T-Bird, 429 cid...died tragically

(in reply to kspencer)
Post #: 3
RE: 02 Grand Marq EGR help - 2/7/2005 7:53:17 PM   
cctxfish

 

Posts: 735
Score: 0
Joined: 1/12/2005
Status: offline
josser got it right, I don't remember the sensor name but its got 2 hose going to the EGR tube, and it gets clagged after some many miles.

(in reply to eL Dude)
Post #: 4
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Ford Forum >> General Ford Forums >> General Tech
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
hayapower2102
goinstrong945
techmanbd877
94 4x4 range834
cctxfish735
ramrod48608
use common s541
bullitt94486
wheelsup68431
mulletman343

New Vendors
AMSOIL - Performance Oil Technology

Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.