'90 S/C TACH & RGH

Ford Forum Ford Classifieds Photo Gallery Member List Search Ford Recalls Contact FF Sponsors
Ford News Ford Lineup Forum FAQ Calendars Ford TSB's Register Login

'90 S/C TACH & RGH

Printable Version

Ford Forum >> Ford Cars >> Ford Thunderbird >> '90 S/C TACH & RGH

Page: [1]

Message

<< Older Topic Newer Topic >>

'90 S/C TACH & RGH - 10/6/2005 7:28:18 AM

WASLYH

Posts: 9
Score: 0
Joined: 8/5/2005
Status: offline

back ground..again
90 s/c 5spd
parts replaced(not counting rebuild 37K ago)
new blower
new injectors/pressure regulator
new DIS module(last saturday)
new ignition coil pack(last saturday)
new crankshaft position sensor...(last night)
problem: while driving, tach goes to zero rpms and the
bloody thing runs like it only has 2 cylinders...clears up tach goes back to indicating
and car will go good..shut 'er off for 20 mins or so,try to start and u kin crank and crank
and it FINALLY starts..tach = zero/rgh run..clears up!!!
any ideas out there? I AM DESPARATE...running out o' vacation time from work..
any body up this early...i'll stay on line..

Post #: 1

RE: '90 S/C TACH & RGH - 10/13/2005 6:58:22 PM

WASLYH

Posts: 9
Score: 0
Joined: 8/5/2005
Status: offline

just a follow up to my own post...
the problem was a bad camshaft position sensor....local grage guys are on the ball...not the ford dealers though!
also..my hinky speedo problem was a bad vss...anybody else with these problems might beable to use this info...bye 4 now

(in reply to WASLYH)

Post #: 2