Ford Forum  
Ford Forum   Ford Classifieds   Photo Gallery   Member List   Search   Ford Recalls   Contact FF   Sponsors
  Ford News   Ford Lineup   Forum FAQ   Calendars   Ford TSB's   Register   Login  

F250 ground problem...?

  Printable Version
Ford Forums >> General Ford Forums >> General Tech >> F250 ground problem...? Page: [1]
Login
Message << Older Topic   Newer Topic >>
F250 ground problem...? - 12/2/2004 3:33:06 PM   
bbnx

 

Posts: 4
Score: 0
Joined: 12/2/2004
Status: offline
The left rear blinker on my F250 started "fast blinking" today.... It still clicks inside the truck, but the blinker does not work outside. The dash indicator does blink but also very fast. I checked power at the bulb connector and my test light blinked fast too... I'm thinking a ground issue with that connector but am really just guessing.

Any other ideas or suggestions will be greatly appreciated.

Thanks!
Post #: 1
RE: F250 ground problem...? - 2/5/2005 12:17:15 AM   
eL Dude

 

Posts: 10
Score: 0
Joined: 2/4/2005
Status: offline
I'm thinking Lighting Control Module.

What year is it?

_____________________________

`98 Windstar, 115k mi
`96 Crown Vic Police Interceptor, 352k mi

first car,
`70 T-Bird, 429 cid...died tragically

(in reply to bbnx)
Post #: 2
RE: F250 ground problem...? - 2/7/2005 7:44:45 PM   
cctxfish

 

Posts: 735
Score: 0
Joined: 1/12/2005
Status: offline
Also remove the leftside turn lights and check OHMs, maybe a light is shorted internally or very low resistance.

(in reply to eL Dude)
Post #: 3
RE: F250 ground problem...? - 2/7/2005 9:44:23 PM   
cctxfish

 

Posts: 735
Score: 0
Joined: 1/12/2005
Status: offline
Should have said that if the rear is blinking the problem will probably be in the front. Don't forget to check the side marks if any.

(in reply to cctxfish)
Post #: 4
RE: F250 ground problem...? - 6/7/2005 4:40:08 PM   
pakus


Posts: 59
Score: 0
Joined: 6/7/2005
Status: offline
You have a bulb out, the F250 does not have a lighting control module. Also while the codition is occuring, try wiggling the hazard button on top of the steering column. This switch will get gunk in it and cause the concern. If all bulbs are ok, you may have to replace the multifunction switch. Ford SMT

(in reply to cctxfish)
Post #: 5
RE: F250 ground problem...? - 6/7/2005 7:13:51 PM   
cctxfish

 

Posts: 735
Score: 0
Joined: 1/12/2005
Status: offline
Check for a short in the trailer connector.

(in reply to pakus)
Post #: 6
RE: F250 ground problem...? - 6/11/2005 8:20:48 AM   
solo_one

 

Posts: 40
Score: 0
Joined: 4/17/2005
Status: offline
solo_one's photo gallery
Had the same problem on my Ranger, its a bad bulb.

(in reply to cctxfish)
Post #: 7
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Ford >> General Ford Forums >> General Tech
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
hayapower2097
goinstrong945
techmanbd877
94 4x4 range834
cctxfish735
ramrod48608
use common s541
bullitt94485
wheelsup68431
mulletman343

New Vendors
AMSOIL - Performance Oil Technology

Ford Forum .com is not affiliated with or endorsed by Ford Motor Company.