AC Problem
Thread Starter
Joined: Aug 2007
Posts: 1
AC Problem
Im new to this forum. I searched the forum for this unusual problem and did not get a hit so here goes...
The AC blew out on our '02 Xplr XLT (4.0L) today at a light. There was a pop and then the truck struggled when my wife stepped on the accelerator. Within a block there was smoke coming from driver's side front wheel well. We pulled over and I took a look but could not see exactly what it was. At first I thought it was a leak in one of the coolant hoses since it was wet on the lower side of engine bay but not likely since there wasn't much of a leak no dripping. .
I let it cool a bit and looked under it and what I found surprized me. It turns out it was the ac compressor housing on the lower half has a hole blown out (roughly 2x3). The hoses are intact and there were no signs prior that we noticed. I collected the pieces and I took pics. I have never heard of this. The only thing I can think of is there was a high pressure issue but I assumed the hoses would give before the (cast) housing .
anybody heard of this before? what causes it.
[IMG]local://upfiles/12226/DB451D8EB83745E883AE1B833EDAB843.jpg[/IMG]
[IMG]local://upfiles/12226/7D4E4924A351443282CF2796FC7466C4.jpg[/IMG]
[IMG]local://upfiles/12226/BAB4602D8F134C398A52D0CC972F3738.jpg[/IMG]
The AC blew out on our '02 Xplr XLT (4.0L) today at a light. There was a pop and then the truck struggled when my wife stepped on the accelerator. Within a block there was smoke coming from driver's side front wheel well. We pulled over and I took a look but could not see exactly what it was. At first I thought it was a leak in one of the coolant hoses since it was wet on the lower side of engine bay but not likely since there wasn't much of a leak no dripping. .
I let it cool a bit and looked under it and what I found surprized me. It turns out it was the ac compressor housing on the lower half has a hole blown out (roughly 2x3). The hoses are intact and there were no signs prior that we noticed. I collected the pieces and I took pics. I have never heard of this. The only thing I can think of is there was a high pressure issue but I assumed the hoses would give before the (cast) housing .
anybody heard of this before? what causes it.
[IMG]local://upfiles/12226/DB451D8EB83745E883AE1B833EDAB843.jpg[/IMG]
[IMG]local://upfiles/12226/7D4E4924A351443282CF2796FC7466C4.jpg[/IMG]
[IMG]local://upfiles/12226/BAB4602D8F134C398A52D0CC972F3738.jpg[/IMG]