NAME THAT PART!!
 

I need to find out the name of a few parts in this pic...pictured is the rear right side
http://i25.photobucket.com/albums/c8...12377/huh1.jpg
My pic and diagram isn't all that great but if anyone can help me I would appreciate it!

RE: NAME THAT PART!!
 

Your link sent me to MSN Autos for sale.

RE: NAME THAT PART!!
 

Hmm not too sure on why it would do that...I've found out that 1 & 2 are control arms, now I just need to know what # 3 is if anyone can help!
http://i25.photobucket.com/albums/c8...12377/huh1.jpg

RE: NAME THAT PART!!
 

Rear Suspension Tension Strut

RE: NAME THAT PART!!
 

Your Taurus a Sedan or Wagon?

RE: NAME THAT PART!!
 

It's a Sedan..And thanks for telling me that part! My brother named off a few parts that would be back there for me but when he had said tension 'strut', I dismissed it thinking he was talking about my struts!

RE: NAME THAT PART!!
 

Nice job on the 'by hand' drawings..

Did you find any bad/worn components to causethe excessive/negative camber?

RE: NAME THAT PART!!
 

LOL :DThanks on the complimenton my 'drawing'...my 8 yr old seems to think he could do better! And if you look at the pic I posted, you can see that what I have labeled as #1 (control arm) is bent up pretty good! I've bought a new one and having it replaced this weekend. I'm hoping after that and an alignment that my rear will be in camber. When you look at the wheels from the rear of the car, they are leaning in at the top like / \ If they can't align it because something else is wrong, then I'll get them to tell me what is wrong...bad struts or something maybe?

RE: NAME THAT PART!!
 

Does have a bit of a 'elbow' in it ;) What did you snag it on?

RE: NAME THAT PART!!
 

I have no clue what happened quite honestly! Just noticed that everytime I hit water, dirt, pebbles, etc it throws me all over the road. Then one day I noticed my left rear tire was going flat, looked at it and the coils were showing! Put on a spare and drove it for a few days. The 'all over the road' mess got worse.I was putting groceries in the trunk not long after andlooked at the rear...that's when I noticed the tires leaning in at the tops. Could my 'bent elbow' be making bothtires lean in?

RE: NAME THAT PART!!
 

Generally most front wheel drive cars will run a small amount of negative camber to help with stability and improve the handling.. But if your scrubbing off the inboard edge of the tires on down to the cords it sounds excessive.. A bent control arm would most certainly affect the 'thrust line/angle'or the relationship of the back tires to the fronts in a straight line, causing the car to 'dog track' or want to pull the back end off center from the front drivers and make for a squirrlley ride.. Would affect camber as well.. Struts don't actually hold the vehicles ride 'height' but do control road feel and bounch and of course tire wear.. The springs control the amount of ride height and the camber and contribute to the scrub radius (tire wear area/contact to the ground) ect. of the tires, more so if the springs have 'settled' over time.. In the past, cars were set for more possitive cambers to offset for load/s and road speed ect... With one sidedamaged, chances are it wouldn't cause the opposite side to go negative, but anytime a component is damaged, it generally affects relatedspecs/componenets.. If you have your trusty camera handy, take a few pics for a 'side to side' comparision view from the back of the car for posting..

RE: NAME THAT PART!!
 

Have my trusty cam ready at all times! But at the present time, I have a friend over changing that bent elbow for me :) Going to see how much that helps the tires to straighten up. If it don't help much, next will be replacing the struts. I talked with the previous owner and they say the struts have never been changed. Should be about time then right? I bought the car for $400 a yr ago. Haven't had a bit of trouble til now. I knew I would have to put more money into it eventually. I've gotten my $400 out of it so I'm happy!
By the way, is there another name for the tension strut? I went on the Ford Parts website and searched for it and that part didn't come up. I don't need it changed so it's not that important but just curious about the name of the part being that I can't find it anywhere!

RE: NAME THAT PART!!
 

http://i25.photobucket.com/albums/c8...12377/rear.jpg
OK, here we go. Take a looksie at the new pics. On the bottom pics, the left control arm is facing out, right one is facing in. (If you can tell by the pics..the sun wasn't working with me today...lots of glare!)The old right control arm was facing in when taken off so the new one was put back on facing in. Does is matter which way they go? Do they both need to be facing the same way? Also, I'm told the bushing on #1, which I have labeled #2, looks like it needs to be changed but still can't find that part.

RE: NAME THAT PART!!
 

see if this site helps you any.

I wasn't able to see your pictures, but you can forget Ford's new Parts Website! I needed Rear Wheel Hub Assemblies. Should be pretty easy, right? I went to "parts.ford.com" and entered the wife's Taurus' VIN and searched for the keyword, "Hub", "bearing, Hub Assembly", etc. Every single time, "NO RESULTS", was the return! I tried "Contact Us". Well, you can forget that, too, unless you would like to speak to someone in Bangladesh, whom you cannot understand! There are no email addresses shown. Thought you'd all likme to know where Ford is headed.

Didn't find any link.

I used this link with good results
https://www.autoanything.com/car/for...95A1A6A43.aspx