Ford Expedition The Expedition provides the feel of a full size truck with the seating of a large SUV.

Wont Start Code DTC B1845

Thread Tools
 
Search this Thread
 
  #1  
Old 10-07-2011, 07:10 PM
dnichole00's Avatar
Junior Member
Thread Starter
Join Date: Oct 2011
Posts: 1
Default Wont Start Code DTC B1845

Any help with this would be unbelievably appreciated. I have a 1997 Ford Expedition XLT with the 5.4 Triton. It is four wheel drive and up until a year ago, ran perfectly. A few months after parking the Expedition, I came out, started it up, and unfortunately it would not shift out of park. I read online some where that a specific relay may be bad (unfortunately I can not find this thread any longer) and it stated that if I could turn the key on with out starting the vehicle, shift in to neutral, then start it and if it went in to gears that way, it was this specific relay. Well this process worked. Unfortunately, that is where I left it. I never replaced this relay. A few months after that, I went out and attempted to start it. Nothing. The starter wire (the main large one) had come apart. I replaced the starter and now the Expedition turns over but will not run. The theft light blinks excessively and it gets no gas. I do not believe it is the fuel pump as I have attempted to spray starter fluid in to the intake. It does not fire at all. Now I as well as my mechanic believe that it has something to do with the theft system. I bought a new key, programmed it, and unfortunately it still does the same thing. We also by passed the theft system by rewiring the section that runs under the dash at the back/bottom of the steering column. That too did not work and we have since rewired it back to how it originally was. I am totally puzzled as to what I can do next. At one point it was spewing out tons of error codes when we hooked it up to the computer. Now it only is giving out one error code which is DTC B1845. I appreciate you folks who are taking the time to read through this novel and any help with this matter, well I’d probably fly to where ever you are and kiss you.

 
  #2  
Old 10-08-2011, 03:37 AM
hanky's Avatar
Senior Member
Join Date: Jun 2010
Posts: 14,648
Default

B1845 is an ignition tamper circuit failure.
Did you check all the fuses?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
donkmoore
Ford Freestar
0
03-17-2008 12:30 PM
bill9iron
Ford Explorer
3
08-15-2007 07:47 PM
stone
General Tech
3
09-03-2006 03:50 AM
sgtmark2
General Tech
2
04-09-2006 02:12 AM
sgtmark2
Ford Focus
1
04-08-2006 06:40 PM



Quick Reply: Wont Start Code DTC B1845



All times are GMT -5. The time now is 08:15 AM.