Hello, I need some advice / instruction on changing a 5.0 engine from a 1989 Bronco to a 1995 Bronco. They both have the same size engine, but I was wondering what kind of problems I would run into.( such as electrical connectors ). I appreciate any help, Thanks Rick D.

 

[sm=welcomesign.gif][hr]As far as the electrical connectors you should reuse the old intake manifold this way all your connectors will be the same.[hr]For the engine removal.[hr]You will have to remove the bell housing bolts,motor mount bolt's,tourqe converter bolts to flywheel,disconnect all wire's and hose's to engine,remove radiator,disconnect exaust,and the a/c if you have it.Every thing must be disconnected from the engine in case i missed somthing. and get a engine hoist and remove the engine.[hr]To install do the above in reverse.

 

94 4x4 ranger, Thank you, That's the exact info. I was looking for !! Take Care

 

No problem,You may want to buy the book for your truck for more detailed info.And the intake must be tourqed in a special way with a tourqe wrench.