I have purchased a 2020 F-250 FX4 with the SXT package. I have notice two connectors underneath the rear by the spare tire. I can't find out what these are designed for. Is there a method to identify the spare connectors and their locations on my vehicle?


Sorry this is turned. Driver side inside chassis near spare tire.

 

Spare connectors are not something to be worried about if all your features works correctly. Manufacturers make one wiring harness to work on vehicles with the most features, this same harness gets installed on all vehicles regardless of the trim/package. Depending on which package the vehicle has there will be some connectors that dont go anywhere since those features are not included in the package.

Post pictures of the connectors making sure to get the colors of the wires that go into the connectors. Specify what side of the vehicle they are on as well. Im not promising anything but Ill give it a try.

 

Scott, Thank you for the quick reply. Not so much worried as I am excited about finding spare connectors and learning what they may be designed for. I don't have the bed lights in my truck and hope that these are for those lights. This would make for an easy modification if so. If not, I wonder what they are provided for.

 

Do you have the electric tailgate lock and tailgate release button on the tailgate handle?

 

I do have the electric tailgate lock. works with the fob. I am not sure about a tailgate button.

 

What are those wire colors for each connector?
Looks like the white connector wires are green/white and black or gray.
Looks like the black connector is white and black or gray.

I checked the bed light wiring diagram and the wire colors dont remotely match your picture.

 

you're correct on the colors I can’t tell if they are black or gray though.

 

I got nothing based off connection locations diagrams.
Next best choice will be for you to pick your top ten features that are not included in your package and I will look through those wiring diagrams and see if there are 2 wire connectors with the correct color wires in that location.

 

i do not have back up sensors in my rear bumper. Could this be one of the connectors?

 

Nope, back up sensors use three wires not two.